After originally showcasing it at Computex a bit earlier this year, GIGABYTE has officially introduced its quad-SSD PCIe 4.0 adapter card, the AORUS Gen4 AIC. Designed house up to 4 NVMe SSDs, the card is essentially a multi-way M.2 adapter, allowing a PCIe 4.0 x16 slot to be used to drive four x4 SSDs. Fittingly, with so many high-end SSDs on a single board, the card also features an active cooling system to ensure that the drives run at consistent speeds even under high loads. Fully populated with PCIe 4.0 SSDs, the card is rated to provide up to a staggering 15 GB/s of throughput – at least, if you can come up with a workload that can saturate such a setup.

GIGABYTE’s Aorus Gen4 AIC SSD 8 TB is a PCIe 4.0 x16 board with eight PCIe Gen 4 re-drivers. The card in turn carries four 2 TB M.2-2280 SSDs based on Phison’s PS5016-E16 controller, which remains the only client SSD controller with a PCIe 4.0 x4 interface. The card also features a sophisticated cooling system comprising of a large copper heatsink, a 5-cm ball bearing fan, and a baseplate, along with eight thermal sensors to monitor everything. That monitoring, in turn, is provided by the Aorus Storage Manager software, which can also configure the cooling on the card and supports three fan operating modes, including Silent, Balanced, and Performance.

When running in RAID 0 mode, the Aorus Gen4 AIC SSD 8 TB offers up to 15 GB/s sequential read/write speeds, as well as 430K/440K read/write IOPS. It goes without saying that this is a throughput-focused card, as outside of the difficulty in even coming up with that many IOPS in a client workload, RAID modes don't really improve IOPS.

While the sequential performance of the Aorus Gen4 AIC SSD 8 TB looks extremely attractive, there is a caveat. The only enthusiast-class PCIe Gen 4-supporting platform today is AMD’s Ryzen 3000, and these CPUs only support 24 PCIe 4.0 lanes: x16 for an add-in-card, x4 for an NVMe SSD, and x4 to connect to the chipset. As a result, to make full use of the card you have to give up a board's sole PCIe 4.0 x16 slot for the SSD, which makes this a niche product for systems that don't need a powerful dGPU. Otherwise, installing the drive into a PCIe x16 slot controlled by AMD’s X570 chipset would cause it to be bottlenecked by the PCIe 4.0 x4 link between the chipset and the CPU.

That said, the Aorus Gen4 AIC SSD 8 TB can show itself in all the glory either in a workstation based on AMD’s EPYC 7000-series processor with up to 128 PCIe Gen 4 lanes, or, presumably, in a future high-end desktop based on next-generation AMD Threadripper CPU.

Related Reading:

Source: GIGABYTE (via Hermitage Akihabara)

Comments Locked


View All Comments

  • Dug - Friday, September 20, 2019 - link

    You are correct. This is a singe local solution, and a good one at that. for running the work loads this is intended for, although realistically 2x 2TB m.2 onboard would probably suffice for most. Expansion to an external flash array would give more iops if that is what's needed.

    If you could fit your workload in 2TB onboard m.2, than this adapter would be perfect to offload to if you need to quickly work on something else. The adapter card could then offload to server storage and not effect your workload.
  • hubick - Friday, September 20, 2019 - link

    My hobby is stitching 100+ 47 megapixel 25MB .jpeg's into multi-gigabyte 100,000+ pixel wide panoramas. I could use this. I plan on building a new PCIe 4.0 system whenever it is that I can buy an HDMI 2.1 graphics card capable of driving an 8K display. I'm currently using a couple Corsair MP600's in RAID 0 on PCIe 3.0, which isn't horrible - I wonder if I picked up a couple more, if it would be safe to remove their heatsink in favour of the active cooling on this card, hmm...
  • alpha754293 - Monday, September 23, 2019 - link

    "Fully populated with PCIe 4.0 SSDs, the card is rated to provide up to a staggering 15 GB/s of throughput – at least, if you can come up with a workload that can saturate such a setup."

    I'll believe it when I see it.

    My current deployment of four Samsung 860 EVO 1 TB SATA 6 Gbps SSDs in RAID0, connected to a Broadcom/Avago/LSI MegaRAID 12 Gbps SAS HW RAID HBA can't do more than like 1.2 GB/s in actual practice right now. Theorectically, it should be capable of at least 3 GB/s.
  • Uzbkon - Tuesday, September 22, 2020 - link

    Is it compatible with asus rog zenith II extreme?
    And does it need some extra adapter or something?

Log in

Don't have an account? Sign up now