Today Qualcomm is announcing an update to its extremely successful Snapdragon 865 SoC: the new Snapdragon 865+. The Snapdragon 865 had already seen tremendous success with over 140 different design wins, powering some of the best Android smartphone devices this year. We’re past the hectic spring release cycle of devices, and much like last year with the S855+, for the summer and autumn release cycle, Qualcomm is providing vendors with the option for a higher-performance binned variant of the chip, the new S865+. As a bit of a arbitrary, but also important characteristic of the new chip is that this is the first ever mobile silicon to finally pass the 3GHz frequency mark.

Qualcomm Snapdragon Flagship SoCs 2020
SoC Snapdragon 865

Snapdragon 865+

CPU 1x Cortex A77
@ 2.84GHz 1x512KB pL2

3x Cortex A77
@ 2.42GHz 3x256KB pL2

4x Cortex A55
@ 1.80GHz 4x128KB pL2

4MB sL3 @ ?MHz
1x Cortex A77
@ 3.1GHz 1x512KB pL2

3x Cortex A77
@ 2.42GHz 3x256KB pL2

4x Cortex A55
@ 1.80GHz 4x128KB pL2

4MB sL3 @ ?MHz
GPU Adreno 650 @ 587 MHz Adreno 650 @ ?
+10% Perf
DSP / NPU Hexagon 698

(Total CPU+GPU+HVX+Tensor)
4x 16-bit CH

@ 2133MHz LPDDR4X / 33.4GB/s
@ 2750MHz LPDDR5  /  44.0GB/s

3MB system level cache
ISP/Camera Dual 14-bit Spectra 480 ISP

1x 200MP

64MP ZSL or 2x 25MP ZSL

4K video & 64MP burst capture
8K30 / 4K120 10-bit H.265

Dolby Vision, HDR10+, HDR10, HLG

720p960 infinite recording
Integrated Modem none
(Paired with external X55 only)

(LTE Category 24/22)
DL = 2500 Mbps
7x20MHz CA, 1024-QAM
UL = 316 Mbps
3x20MHz CA, 256-QAM

(5G NR Sub-6 + mmWave)
DL = 7000 Mbps
UL = 3000 Mbps
Mfc. Process TSMC
7nm (N7P)

We’ve come to know the Snapdragon 865 quite well over the last few months, detailing the performance of the chipset in our initial benchmark articles as well as a more extensive deep-dive in our Galaxy S20 review. The new Snapdragon 865+ is a new binned variant of the same chipset with higher peak frequencies on the part of the “prime” CPU as well as the GPU, promising +10% performance on both aspects.

The First Mobile Silicon to Break Past 3GHz – 3.1GHz Even

Whilst in relative terms the new chipset’s +10% clock improvement isn’t all that earth-shattering, in absolute terms it finally allows the new Snapdragon 865+ to be the first mobile SoC to break past the 3GHz threshold, slightly exceeding that mark at a peak 3.1GHz frequency. Ever since the Cortex-A75 generation we’ve seen Arm make claims about their CPU microarchitectures achieving such high clock frequencies – however in all those years actual silicon products by vendors never really managed to quite get that close in commercial mass-production designs.

We’ve had a chat with Qualcomm’s SVP and GM of mobile business Alex Katouzian, about how Qualcomm achieved this, and fundamentally it’s a combination of aggressive physical design of the product as well as improving manufacturing yields during the product’s lifecycle. Katouzian explained that they would have been able to achieve these frequencies on the vanilla Snapdragon 865 – but they would have had a lower quantity of products being able to meet this mark due to manufacturing variations. Yield improvements during the lifecycle of the Snapdragon 865 means that the company is able to offer this higher frequency variant now.

For context, in the mobile world, usually SoC SKUs are binned not by performance (clock-frequency), but by power (voltage variations). This comes in contrast to the desktop and server world where one single silicon design is binned by different performance SKUs, varying in frequencies or even functional blocks. In a sense, Qualcomm’s 855+ and 865+ are SKUs that expand the product line in the way that usual PC silicon vendors do. Other mobile vendors such as MediaTek for example also take advantage of such product segmentation by releasing a single silicon design as multiple product SKUs.

As to what this means for the power and efficiency of the new Snapdragon 865+: There will be a power increase to reach the higher frequencies, however this will only be linear with the increased clock speed, meaning energy efficiency of the new SoC will maintain the same excellent levels of that of the Snapdragon 865, so battery life will not be affected.

More + Designs This Year

This mid-year refresh was only introduced last year with the Snapdragon 855+, and while we’ve seen some vendors opt for the upgrade in their latest device releases, uptake was rather limited, with only a few handful more prominent devices such as the ASUS ROG Phone II.

This year, Qualcomm tells us that we should be expecting more adoption for the refreshed silicon, with more design wins. Amongst the publicly announced platforms today is naturally the AUSS ROG Phone 3, with full details on the phone to follow in the next couple of weeks. Lenovo is also part of the launch partners, promising to bring to market a smartphone under the Lenovo Legion branding.

Amongst other new novelties of the Snapdragon 865+ platform is the ability for vendors to bundle with the new FastConnect 6900 Wi-Fi chips from Qualcomm, the company’s new Wi-Fi 6 chipsets with 6GHz band capability (Wi-Fi 6E).

We’re looking forward to devices with the new Snapdragon 865+ in the coming weeks and months.

Related Reading:

Comments Locked


View All Comments

  • s.yu - Thursday, July 9, 2020 - link

    Totally agree!
  • 29a - Friday, July 10, 2020 - link

    3.5mm jacks were removed to make the phones waterproof.
  • Myrandex - Friday, July 10, 2020 - link

    lies, plenty of phones had water resistance with them, see the Galaxy S8, S9, and S10.
  • s.yu - Tuesday, July 14, 2020 - link

    "3.5mm jacks were removed to make the phones waterproof. "
    Along with "passing along savings"(of a few cents, if passed along at all), "additional space for batteries"(100mah as Samsung admitted), why are these laughable lies repeated? What do you people have to gain from the jack being castrated? There's negligible benefit to the consumer and massive greed in this maneuver.
  • s.yu - Thursday, July 9, 2020 - link

    No, only a handful of devices use pull tabs against glue for example, which has nothing to do with thickness, and glue isn't even all that necessary for a battery in a sealed device.
  • dotjaz - Wednesday, July 8, 2020 - link

    Nope. We have people doing that for us.
  • iphonebestgamephone - Friday, July 10, 2020 - link

    A 5 minute job at the local service center every 2 years is somehow too much?
  • s.yu - Thursday, July 9, 2020 - link

    Sounds amazing, but no idea how you managed to charge only every other day, my S6E, backup device is almost glued to the charger, and if unplugged, not used for anything except the occasional text or call, and still the battery lasts a day at best, half a day at worst and the device lags.
  • TheinsanegamerN - Wednesday, July 8, 2020 - link

    Stop buying expensive garbage. My moto z play was $400 5 years ago, and sported insanely long battery life. Plenty of people reviewing it said the same thing: "why would you ever need a battery life that long?"

    This is why: 5 years later and deapite loosing some capacity this phone still provides 10 hours of SoT on a single charge. Most modern $1K flagships have no hope of getting that far. Meanwhile you can now buy a $250 moto g power with almost twice the battery life.

    I agree that phones shouldnt be sealed, but at the same time that modularity you talk about takes up a TON of room you just dont have in a phone.
  • zepi - Wednesday, July 8, 2020 - link

    Moto Z play was released in September 2016 (announced a month earlier).

    That was 3 years 10 months ago.

Log in

Don't have an account? Sign up now