ABS Ultimate X9: Core 2 Extreme Hits a Speed Bump
by Jarred Walton on August 18, 2006 1:35 PM EST- Posted in
- Systems
Externals and Appearance
Starting with first impressions, the case certainly appears attractive, though obviously that is a subjective judgment. The all black exterior, dimly glowing blue lights, and relatively quiet operation start things out on a good note. [Sorry for the finger prints -- they showed up in the images due to the flash, though they are not nearly as visible normally.]
ABS uses a Gigabyte Aurora 3D case as the basis of the system. The case is sturdy and is something we would consider purchasing on our own. It's relatively roomy, has a decent layout, and comes equipped with three low-RPM 120mm fans.
The drive bay door is metal and has a very solid feel to it, and it snaps shut with the aid of a reasonably strong magnet. Power and reset buttons as well as the optical drives (and any other external drives) are concealed behind the door, which can be locked with a key if necessary to keep tiny fingers and prying hands away from things they shouldn't touch.
The right side of the case doesn't have much to look at other than the front USB, FireWire, and audio ports. You can also see the lock for the front door, and at the rear of the case you can see the water radiator jutting out. We'll take a closer look at that in a moment.
The view from the left side is similar, with the only difference being the mesh grille towards the rear of the case and the latch used to help secure the side panel. A small amount of light is visible through the ventilation, but it isn't overly bright.
Moving to the rear of the system, we get our first look at the water cooling system. Two ¾" tubes exit from the bottom of the case through an expansion bracket and lead up to the radiator and fan towards the top. At the bottom of the case, where the tubes exit, you can also see the fan speed control for the radiator. Depending on the operating environment and system load, you can reduce noise level quite a bit by turning down the fan speed. With the overclocked CPU and under full stress, however, you will probably want to keep the fan speed at maximum in order to ensure proper cooling.
The features table already covered the various ports that are included, so we won't get into further details of that area. Basically, you get all of the typical connections you would find on the back of any modern computer. In our particular configuration, all of the rear expansion slots are populated, so even if you wanted to there's no available slots to add additional expansion cards. Let's take a look at the inside.
Starting with first impressions, the case certainly appears attractive, though obviously that is a subjective judgment. The all black exterior, dimly glowing blue lights, and relatively quiet operation start things out on a good note. [Sorry for the finger prints -- they showed up in the images due to the flash, though they are not nearly as visible normally.]
 |
| Click to enlarge |
ABS uses a Gigabyte Aurora 3D case as the basis of the system. The case is sturdy and is something we would consider purchasing on our own. It's relatively roomy, has a decent layout, and comes equipped with three low-RPM 120mm fans.
 |
| Click to enlarge |
The drive bay door is metal and has a very solid feel to it, and it snaps shut with the aid of a reasonably strong magnet. Power and reset buttons as well as the optical drives (and any other external drives) are concealed behind the door, which can be locked with a key if necessary to keep tiny fingers and prying hands away from things they shouldn't touch.
 |
| Click to enlarge |
The right side of the case doesn't have much to look at other than the front USB, FireWire, and audio ports. You can also see the lock for the front door, and at the rear of the case you can see the water radiator jutting out. We'll take a closer look at that in a moment.
 |
| Click to enlarge |
The view from the left side is similar, with the only difference being the mesh grille towards the rear of the case and the latch used to help secure the side panel. A small amount of light is visible through the ventilation, but it isn't overly bright.
 |
| Click to enlarge |
Moving to the rear of the system, we get our first look at the water cooling system. Two ¾" tubes exit from the bottom of the case through an expansion bracket and lead up to the radiator and fan towards the top. At the bottom of the case, where the tubes exit, you can also see the fan speed control for the radiator. Depending on the operating environment and system load, you can reduce noise level quite a bit by turning down the fan speed. With the overclocked CPU and under full stress, however, you will probably want to keep the fan speed at maximum in order to ensure proper cooling.
The features table already covered the various ports that are included, so we won't get into further details of that area. Basically, you get all of the typical connections you would find on the back of any modern computer. In our particular configuration, all of the rear expansion slots are populated, so even if you wanted to there's no available slots to add additional expansion cards. Let's take a look at the inside.
Facebook
Twitter
RSS
48 Comments
View All Comments
Future1investor - Tuesday, August 11, 2009 - link
I bought this unit in Oct 2006 except instead of the ATI video it has the GF7950GX2-1GB NVIDIA card. I also have a Depot or Onsite 3yr Warranty, which is the issue here.After the liquid cooling pump went out and I started experiencing various problems likely to be related, ABS would not give me onsite service. Instead they wanted me to remove the Liquid Cooling unit, and ship me an air-cooled replacement. After much pain in communications, they then expected me to send it back and then ship me another liquid cooler. But I said with the other problems the whole system needs to be diagnosed properly on the bench.
I shipped the whole computer back at my expense of $87 through UPS. When they received it they again balked saying that they "don't do that" which I interpreted as bench diagnostics. This was confusing because under warranty, the risk of the average user damaging something can be rather high if they are asked to do their own diagnostics and replacements (even given phone assistance). But what of the 3Yr Onsite warranty?
Anyway, long story short; they agreed to bench test and fix what was needed. They told me after a week that they had replaced the liquid cooling unit and the graphic card. I also had a problem with the OS recognizing an additional 4GB Ram same timing, same brand. They said that they'd test for that too but I havn't heard the results. They have closed the RMA and I assume the computer is on route back across the country to me.
Communication has been poor. I don't know if my additional 4GB Ram will be utilized. They changed the Onsite warranty to Depot only. I had to pay for packaging and shipping back to their dock at $87. A few months ago, a phone call to support, to talk about the Ram was met with odd laughter. The person on the phone said it was to be expected for buying that operating system (Windows XP Professional) the only thing available at time of purchase.
This was my second computer purchase from ABS. The first with a 3Yr Onsite Warranty. The tech support is sketchy. They will only call you back from an unidentifiable phone number. They want you to pay for shipping along with any replacement parts, saying that they'll reimburse you once they receive the defective pieces. They want you to do your own repairs. And only if you push the issue to the wall will they attempt normal customer satisfaction (though I paid for it with additional costs to me).
Perhaps ABS' business is not as good as it used to be, and perhaps they are cutting corners and cutting up warranties at the expense of future business.
Considering ABS for a future purchase looks doubtful. Like customer service from Dell. It is a customer nightmare scenario. Though Dell is much much worse! I will be focusing more attention on the warranty service given though Digital Storm. They have one of the absolute highest customer service ratings of any boutique computer retailer. Though I will still monitor the rating in this area for ABS, as perhaps things will improve greatly?
appu - Saturday, August 26, 2006 - link
Just came across this yesterday - http://www.velocitymicro.com/">http://www.velocitymicro.com/How about test-driving one of their systems (although I think we can hazard guesses at the results for the most part)?
These guys also seem like a really nice alternative to building your own box if you don't like generic OEM stuff and don't have the time to put one together yourself. I was definitely impressed with the 15-20 mins I spent on the site looking at various options.
Justin Case - Sunday, August 20, 2006 - link
One month ago all articles around here were saying what a brilliant combination Core + Crossfire was. Now AMD buys ATI, and all of a sudden the conclusion changes to "Crossfire is immature". Interesting...yyrkoon - Sunday, August 20, 2006 - link
"The second item worth nothing is that the NVIDIA SLI solution outperforms all of the X1900 CrossFire configurations, including the 20% overclocked ABS, even when using a slower CPU. Other games might perform better on CrossFire, but there certainly appears to be plenty of room for improvement in the ATI drivers, particularly when it comes to Core 2 optimizations."Saying that ATI needs to iron out thier drivers for core 2 duo is hardly concluding thats 'Crossfire is immature'. Of course, I can pretty much twist something someone says in any dirreciton I want to also. However, I think taken in with the rest of the context, they are trying to say something along the lines that performance wise right_now, Crossfire boards seem to underperform the nVidia varients, but this doesnt mean its going to hold true in the future.
JarredWalton - Sunday, August 20, 2006 - link
On AM2/939, CrossFire often beats out 7900GTX SLI. On Core 2 *right now* it doesn't, at least in the tests I looked at. (I don't have a full SLI 775 Core 2 setup right now, unfortunately.) I've *always* felt CF left a bit to be desired, and I'd say the same thing about .NET and CCC. For whatever reason, some of the issues with CF were magnified on this ABS system. Seriously, THIRTY SECONDS after XP shows the desktop before CCC is finished loading. That's terrible. It's also about 3X as long as a 939 ASUS A8R32-MVP for the same thing, which is why I conclude that CF on C2E has some issues. Of course, the 6.8 drivers may have just addressed a bunch of my concerns - I have to retest that before sending the system back.yyrkoon - Monday, August 21, 2006 - link
I will agree with you that 1 minute OS load times is terrible, hell even my budget Asrock AM2NF4G-SATA2 / 3800+ system boots XP in 18 seconds, and thats from IDE. Not that its cutting edge technology either . . .JarredWalton - Monday, August 21, 2006 - link
It's about 18 seconds to load the OS, but it's 33 seconds of POST codes and 35 seconds of ATI/.NET after XP is basically loaded. With RAID 0 Raptors no less. And people wonder why we at AnandTech often say NVIDIA seems to have more robust solutions....yyrkoon - Monday, August 21, 2006 - link
Well, when I said 18 seconds, its 18 seconds to boot to desktop, and about 1-2 seconds more and its ready to use, however, I just installed the 2.0 framework for microsoft web dev express, and havent rebooted yet. so perhaps it'll take a little longer now. I still dont have 1.1 installed, but on this machine (my gaming rig) I dont plan on installing it, thats what my dev box is for :)JarredWalton - Monday, August 21, 2006 - link
.NET should only affect load times when it is used - i.e. by the ATI CCC drivers. I don't think just installing it really impacts performance. I have it installed on most of my PCs - both 1.1 and 2.0 - and have never noticed any delays on booting, except when using an ATI card.KrazyDawg - Monday, September 4, 2006 - link
I never really noticed that the ATI drivers utilizing .NET was the cause of a longer boot time. In the past, I used omega drivers for my Radeon 9800 Pro but stopped using them when the latest release failed to install properly. I haven't tried other drivers since but a driver review would be interesting and beneficial to many.