Making Nehalem Affordable: LGA-1156

Take the Core i7, shave off one memory controller and replace the high bandwidth QPI link with Intel’s slower DMI and you’ve got the makings of a (more) mainstream Nehalem.

Many have been calling this processor the Core i5 although I’m not quite ready to jump on that bandwagon, so I’ll keep referring to it by its socket (LGA-1156) or codename (Lynnfield).

Intel’s QPI is a very fast bus delivering up to 25.6GB/s of bandwidth. The image below shows you how Intel sees it being useful:

If you’ve got a multi-socket system (e.g. dual processor Xeon workstation, or Skulltrail successor) or if you’ve got a lot of high bandwidth PCIe devices (e.g. multi-GPU or lots of Larrabees) then QPI makes a whole lot of sense. However, if you’ve got a single socket system and aren’t running a lot of high bandwidth PCIe devices then QPI is overkill.

Intel’s DMI is the link used between the X58 chipset and the ICH10 I/O controller, it’s a much more conservative bus capable of delivering 2 - 4GB/s of bandwidth. That’s enough bandwidth for things like SATA and USB but a single PCIe x16 slot can deliver 16GB/s of bandwidth, far too much for Intel’s DMI.

Instead of crippling graphics on its mainstream platform, Intel did the next best thing and integrated 16 PCIe 2.0 lanes onto the die of its mainstream Nehalem part.

What you get looks like this:


A Lynnfield system only need two chips (CPU + PCH) while a Bloomfield system needs three (CPU + IOH + ICH)

The 16 PCIe 2.0 lanes can be configured as one x16 or two x8, allowing you enough bandwidth and very low latency to do things like CrossFire or SLI. Any additional PCIe lanes will branch off of what Intel is now calling the Platform Controller Hub (PCH). The first PCH is Intel’s P55 chipset; all you need is a Lynnfield CPU and the P55 PCH, no additional ICH is necessary as all of that functionality is embedded in the PCH.

The price of Intel’s P55 PCH is also much lower than the X58 chipset, in fact P55 is expected to be price competitive with P45 + ICH10. In other words, we should eventually see P55 boards priced at $100 or less.

Getting rid of QPI and one of the three DDR3 channels knocked down the pin-count of LGA-1366, but adding in 16 PCIe 2.0 lanes brought it back up to 1156 which you can count in the socket below:

I’ve blacked out the motherboard around it and the caps in the middle to protect the innocent.

Index Lynnfield Pricing and Specs
Comments Locked

95 Comments

View All Comments

  • rmlarsen - Friday, May 29, 2009 - link

    This is my concern too. While I suppose I should give the Westmere IGP the benefit of the doubt, I do not have high hopes that it will be anywhere near the performance of the ATI and NVIDIA IGPs we see today.
    And Intel is of course pulling the same stunt with the new Atom chipset.
  • ssj4Gogeta - Friday, May 29, 2009 - link

    I really hope they have a decent graphics core for Westmere. Otherwise the consumers are going to be really annoyed. I read at the INQ that it's going to be much better than current Intel IGP's. Let's hope that's true.
    Maybe they want to eventually replace it with a couple of Larrabee cores in the future.
  • TA152H - Friday, May 29, 2009 - link

    I'm reading this, and I'm really surprised at how slow the Lynnfield is compared to the Core i7. Yet, Anand keeps saying how good it is. What am I missing? It's the same processor, but with modified memory access, and it gets run over by the i7 by up to 5% on many benchmarks.

    This sounds like a brain-damaged chip that should not be made. Sure, they can do turbo-mode better, but they can do that on the i7 as well, and may very well do that with the next revision. It seems the trade-offs have a very significant impact on performance.

    They should name it the Celeron - which also is performs pretty well, but is brain-damaged enough it's not really competitive with Intel's really good CPUs.

    It's still a really good CPU, outside of the context that the i7 is much better. But, if the prices don't overlap, it's still more than good enough to beat anything AMD puts out, and even the Penryn. Still, I'm really surprised at the low performance. I figured it would be close, because dual channel should have better latency than three channel, and the throughput rate wouldn't make so much of a difference. Oh well. At least I know not to wait.

    Great article, Anand. I do not really agree with your assessment of it, although I agree it's still a very attractive processor for many, it was very informative and helps me decide what and when to buy now. Thanks!
  • mesiah - Saturday, May 30, 2009 - link

    I think you are overlooking one important factor here. One reason Anand is so excited about the numbers that the lynnfield posted is because it is a crippled pre-production proccessor. With all of the limitations put on this sample chip it still performs admirably, and the actual production samples almost always outperform these early sample chips.
  • TemjinGold - Friday, May 29, 2009 - link

    You do realize Lynnfield is meant to be the MAINSTREAM part while Bloomfield is the ENTHUSIAST part, right? It was never meant to beat the i7 just as nVidia's GTX260 Core 216 isn't meant to beat the GTX280. That's why it's so much cheaper. By your logic, AMD's entire lineup "shouldn't be made" as all of their chips get creamed by the i7.
  • TA152H - Friday, May 29, 2009 - link

    If Intel were making the Phenom II, I would say there's no reason for the chips at all. They are expensive and slow. But, AMD really has no choice, since they don't have a better design available.

    Your logic is weak. i7 is a LINE of processors, with very expensive ones, and ones that are not so expensive. It's much broader than the GTX280.

    The reality is, it's not that much more expensive for Intel to make the i7. It's more of a marketing segmentation situation, just like they compromise lower end processors now. In this case, the loss of performance is really dramatic, and it's not like they're able to use chips they wouldn't be able to use otherwise, by disabling cache, or that the Lynnfield is going to be a lot smaller.

    We'll see when Anand gets the actual size, but I'd be shocked if you see a substantial difference in size. Probably the Lynnfield will be bigger, since some logic is on the processor now.

    I don't think it's a great tradeoff to lose so much performance, for the limited cost savings. I'd rather have seen them bring the i7 at lower clock speeds down to better prices, instead of artificially inflating the x58 price.
  • Anand Lal Shimpi - Saturday, May 30, 2009 - link

    You are correct, Lynnfield shouldn't be any smaller than Bloomfield (current i7). Remember that this is not only an early chip but it's on a mostly untuned motherboard. I've heard up to a 10% increase in performance for final shipping platforms. That may be more aggressive than I'd say but I think Jarred is on point here; I'd be surprised if we saw an appreciable difference between the i7-920 and the 2.66GHz Lynnfield in apps that spawn 4 or fewer CPU intensive threads.

    It's totally an artificial separation from a silicon standpoint. Intel could just as easily make everything a LGA-1366 processor and forget entirely about 1156. I'm assuming that 1366 boards would inherently be a bit more expensive as routing the QPI link requires a bit more effort than DMI. The main thing is that 1366 does not provide for on-die PCIe, which is necessary given the direction that Intel is going with mainstream graphics.

    I think in the long run 1366 will be reserved for very thread heavy work; the Skulltrail successor will only use 1366 sockets. Enthusiast overclockers may also flock to 1366 but I believe the majority of the market will be served just fine by 1156.

    Take care,
    Anand
  • red77star - Wednesday, September 9, 2009 - link

    I think you're wrong. The only reason Intel released LGA1156 was to 'kill' AMD. It seems to me that Intel doesn't want AMD to be able to compete. Honestly, LGA-1156 has no single value in it. There will never be 6-core CPU for this platform therefore it's absolutely 'future' useless. I own LGA1366 and i realized that i did good purchase. i920 is too good for $279 that Intel wants to kill it. i920 can be overclocked over 1000Mhz, probably not reachable for any of LGA1156 variant. We are talking about 1000Mhz overclock on air cooler and even higher. C0 revision will run 3.8Ghz fine, and D0 over 4.0Ghz meaning it will outperform anything out there. I don't think LGA1366 is only server reserved, wait for 1H 2010 and 6 core release. As soon as AMD pushes 6-core AM3 CPU for the price of newest crippled i7, existence of LGA1156 will lose any point.

    In my book Intel should had released cheaper version of x58 with less features (like less SATA ports, single PCIEx16 etc, dual channel memory), and what they did with LGA1156 CPUs, they could do same in LGA1366 package (by crippling i920) so everything is compatible across the platform and of course kill LGA775.

    Now we have LGA775, LGA1156, LGA1366 - it's called bullshit.
  • esgreat - Saturday, May 30, 2009 - link

    If you want performance, definitely i7 is the way to go...and yes, it does look like a purposeful marketing segmentation.

    It also boils down to price, not really to the end users but the bill of materials (BOM) cost to the manufacturers. A one chip 'chipset' solution will bring about significantly fewer components (capacitors, resistors), and also enable smaller form factors

    This would also mean that as the boards are released, the prices have much more room to drop compared to x58. And the fact that this is the volume mainstream part, economies of scale would ensure significant drops in prices.

    This would make great platforms for the majority of the computers sold by Dell, HP, etc (did I mention that P55 is a 'mainstream' chipset?). Large boards like the X58 isn't suitable for all applications. Imagine trying to stuff a huge X58 motherboard into a mini-chassis business desktop.

    And hey, the fact that you're an enthusiast and performance-conscious user, all your logical explanations concluded choosing the 'performance' platform, i7...exactly how Intel wanted you to do.

    Essentially you choose the performance you want depending on how much you have in your wallet. There's a potential $100-$200 cost savings for Lynnfield which I don't think is 'little'.

    The only question I ask is why you think Lynnfield is not going to be smaller than i7? I thought Anand showed photographs comparing their sizes.
  • MrRuckus - Friday, May 29, 2009 - link

    "and it gets run over by the i7 by up to 5% on many benchmarks."

    Did you really say that? So if 5% is such a large amount, what would you consider to be close??
    Running on an intentionally crippled memory controller and only being 5% away from an i7, I would say thats outstanding.

Log in

Don't have an account? Sign up now