New Heatsinks and Motherboards

LGA-1156 processors use a different heatsink than both LGA-1366 and LGA-775 chips.


Lynnfield and its cooler

As the numbers would imply, the LGA-1156 heatsink has a larger footprint than LGA-775 but smaller than LGA-1366.


From Left to Right: Retail LGA-1366 Cooler, Retail LGA-1156 Cooler, Retail 45nm LGA-775 Cooler

The retail LGA-1156 is actually much closer to the 45nm LGA-775 retail cooler than the LGA-1366 retail HSF:

As you'll see later on in the article, the retail cooler isn't very good for heavy overclocking. Power users will want something a little bigger:

The Lynnfield/P55 launch is huge. Virtually every single motherboard manufacturer has a P55 board available. Prices range from ~$110 - $300 depending on the number of bells and whistles.


Gigabyte's ultra high end UD6 (left) and Gigabyte's lower end micro-ATX UD4 (right)


Gigabyte's high end UD6 comes with 6 DIMM slots like its X58 brethren.

Micro-ATX is increasing in popularity and we actually have some good options this time if you're trying to build a smaller Lynnfield system. Combined with Lynnfield's excellent idle power (the lowest of any quad-core we've ever tested), this could make for an unusually potent HTPC.


A closer look at Gigabyte's micro-ATX P55M-UD4

The only thing we're really missing is a good mini-ITX Lynnfield board. But perhaps the manufacturers will wait until we have on-package graphics before going down that route...

One More Time: New H55 Boards Next Year

As I subtley implied at the end of the last section, Intel is bringing on-package graphics to Nehalem starting in Q4 of this year:

The 32nm Nehalem shrink, codenamed Westmere, will be available with a 45nm Intel graphics core on the processor's package. This graphics core is an evolution of what's currently in the G45 chipset and not Larrabee (although eventually that will change). From what I've heard, this is actually going to be Intel's first reasonably good integrated graphics core.

With the graphics on-package, there needs to be an interface from the processor socket to video output located on the motherboard. As you can see from the P55 motherboards that are launching today: none of them have this video out. Granted there aren't any CPUs out to take advantage of it either.


No DVI/HDMI/VGA out...yet

Early next year (or maybe even late this year) we'll see a new breed of LGA-1156 motherboards with video output, designed for use with these Westmere IGP parts. Rumor has it that these motherboards will use Intel's H55 chipset.

Lynnfield early adopters need not worry, 32nm quad-core processors won't be out for at least a year.

The LGA-1156 Socket Homework: How Turbo Mode Works
Comments Locked

343 Comments

View All Comments

  • Ben90 - Tuesday, September 8, 2009 - link

    Was reading it pretty casually thinking it was just a preview because i didnt think the NDA lifted yet.... then i saw a next page... looked at the tab and it has like 20 pages OMGOMGOMGOMG!!! ITS OUT LOL....Im gonna try really really hard to read the article before i go to the gaming performance though...prolly wont make it
  • Lashek - Wednesday, September 9, 2009 - link

    you compare it to the Q6600 a lot in the text, but no comparison with an overclocked Q6600 is made in the benches...
    If you have figures of an overclocked Q6600, could you add them? all over the web these question are asked but business leaders who own these web sites dont want to challenge a overclocked core 2 duo,and quads,or is it politics?
  • coldpower27 - Thursday, September 10, 2009 - link

    You will have to compare an overclocked I750 or i860 to the Q6600 as that would only be fair, no sense doing a stock vs overclocked comparison.

    It is well known you can equal todays stock performance by overclocking to some degree, but if your going to compare overclock then you need to overclock both processors.

    Q6600 will be destroyed by i750 and i860 if you compare perf/watt however.
  • Joshaze - Wednesday, September 9, 2009 - link

    Anand,

    When testing World of Warcraft what processAffinityMask value where you using?

    The default value for this variable does not take advantage of all cores on the Core i7 processors.

    Here is the article discussing the CVAR: http://forums.worldofwarcraft.com/thread.html?topi...">http://forums.worldofwarcraft.com/thread.html?topi...

    The value should be 255 for 8 cores and 15 for 4 cores.

    If not, any chance you could retest using the above values and report back on any changes?
  • Googer - Wednesday, September 9, 2009 - link

    The lack of PS2 is a real deal killer for me, I have a beloved IBM Clicky Model M keyboard (1391401) and I will not give it up for anything. I know PS2-usb keyboard adapter exist but they just don't work very well.

    I am not alone, there are tens of thousands of vintage keyboard lovers out there and the IBM Model 1391401 is one of the more popular ones among keyboard aficionados.

    Kind of sad that a 20-30 year old keyboard still works as well as they day it was made, new cheaper keyboards are less acuurate, uncomfortable, very flimsy and are poorly made. You would be lucky to get 5-6 years out of 'some' of these newer $90+ keyboards.

    Save PS2, keep it alive. PS/2 has less lag than any USB keyboard I have tried. There are a lot of great keyboards still in use. There is no shortage of real estate on the back IO shields, so there should be no reason not to include a PS/2 port..
  • MamiyaOtaru - Thursday, September 10, 2009 - link

    Seconding this. USB is incapable of providing n-key rollover for keyboards. PS2 can. Not everyone needs that, but I won't do without it.
  • Zoomer - Wednesday, September 9, 2009 - link

    I saw at least one PS2 port on these motherboards. What are you talking about again? Yes, they seem to be shared with the PS2 port for mice, but mice work the same on USB anyway.
  • Taft12 - Wednesday, September 9, 2009 - link

    This is probably the most off-topic post I've seen on this site. Fortunately for all of us, your rant is invalid and you never have to say anything about this ever again:

    http://www.syba.com/index.php?controller=Product&a...">http://www.syba.com/index.php?controller=Product&a...
  • boogerlad - Tuesday, September 8, 2009 - link

    where't ta152h now? That idiot is finally done trolling.
  • snakeoil - Wednesday, September 9, 2009 - link

    all the results of this review are biased because they were made with turbo enabled, that's at least 600 mhz overclocking.
    to be fair you must compare this results against a phenom 2 overclockded at least 600 mhz
    people is not stupid.

Log in

Don't have an account? Sign up now