The LGA-1156 Socket: Size and Installation

The first Core i7, Bloomfield, went into a 1366-pin LGA socket:

A year later we have Lynnfield, and it fits in a much tighter space:

The LGA-1156 socket and Lynnfield CPUs are about as big as the old LGA-775 sockets/chips:


From Left to Right: Intel Core i7 "Bloomfield" (LGA-1366), Intel Core i7 "Lynnfield" (LGA-1156), Intel Core 2 Quad "Yorkfield" (LGA-775)


Note the pad densitiy of Lynnfield vs. LGA-775 processors

The installation process is largely the same as any other Intel LGA socket, the difference being that LGA-1156 uses a new one-sided retention mechanism.

After the socket is "open", gently place the CPU on top of the pins. The chip can only fit in one direction so just pay attention:

With the chip in the socket and the lever still pulled back, move the socket cover over the CPU and slide its teeth under the retention screw on the opposite side:

Then, lower the lever, lock it in place and you're good to go:

Index New Heatsinks and Motherboards
Comments Locked

343 Comments

View All Comments

Log in

Don't have an account? Sign up now