P55 vs. H57 Chipsets

The Lynnfield chipset is P55, it's the successor to P45 and the entire lineage of mainstream performance chipsets. The one thing P55 does not have is an integrated display interface; it has no way of connecting a CPU with on-package graphics, to a HDMI port (or VGA, or DVI).

The H57 chipset does:

Intel's display interface is a narrow bus that carries the video output from Clarkdale's on-package graphics and routes it to the video output on a motherboard.


DVI/HDMI out on a H57 mini-ITX motherboard

Why not give all chipsets video out support? Intel is big on differentiation. The P55 chipset is a bit more overclocking friendly, a set of optimizations that you won't see in H57. Both types of motherboards will take Clarkdale processors.

Index The First H57 mini-ITX Motherboard
Comments Locked

96 Comments

View All Comments

  • jordanclock - Friday, September 25, 2009 - link

    I see you're privy to data we are not seeing. Could you please share where you received this information that moving the memory controller to another chip ON THE SAME SOCKET will somehow cause pre-IMC memory latencies? We'd all like to see some actual numbers instead of sensationalist guesses.
  • KaarlisK - Friday, September 25, 2009 - link

    I remembered reading about it somewhere.
    It was from the benchmark here. http://global.hkepc.com/3878/page/5#view">http://global.hkepc.com/3878/page/5#view
    Though the latency in this review is higher than Core 2's, which makes it suspect.
    As to the why, there are smarter people than me who could answer whether there's any impact from locating the other die on the CPU package or in the chipset.
  • GeorgeH - Thursday, September 24, 2009 - link

    Hopefully more major manufacturers will offer Mini-ITX motherboards this generation. It's nice to see at least one Intel board, but if 775 is any indication it'll be almost ridiculously feature poor.

    I also hope PS and case manufacturers are paying attention - the current crop of mini-ITX options is pitiful.
  • Mr Perfect - Saturday, September 26, 2009 - link

    Absolutely.

    I'm impressed that the mITX has what looks to be an x16 PCIe slot on it though. In the past, Intel was always throwing a PCI or x1 slot on them. I think they where afraid that people would stop buying the bigger, more expensive boards. I know I would have.

    Hopefully Anand will take a good hard look at this sector.
  • tomoyo - Friday, September 25, 2009 - link

    No kidding! There's a total lack of good mini-itx boards with undervolting features and only one server raid case for mini-itx at all. It's sad because I'm sure a ton of people would love to make a small DIY raid nas system and not deal with the low end parts and lack of OS choice in pre-built nas systems.
  • Aquila76 - Thursday, September 24, 2009 - link

    I was going to build an HTPC soon, but if this can really bitstream TrueHD & DTS-MA on a single, low-power chip then I can wait. Next year is going to kill my wallet, but at least I can start saving now!
  • mgl888 - Thursday, September 24, 2009 - link

    What's gonna happen after 22nm? 10nm?
    When are we gonna hit a brick wall and what's Intel plan to do next?
    Quantum computing?
  • Zink - Thursday, September 24, 2009 - link

    It looks like there is going to be a big delay after 22nm because the thickness of certain layers in the transistors can not be scaled thinner.
    Check out 16nm too: http://en.wikipedia.org/wiki/22_nanometer">http://en.wikipedia.org/wiki/22_nanometer
  • jwilliams4200 - Thursday, September 24, 2009 - link

    Each die shrink generation decreases the gate length by a factor of the square root of two (0.707), so that the die area decreases by a factor of two every shrink. To answer your questions, the gate lengths to expect are: 45nm, 32nm, 22nm, 16nm, 11nm, 8nm, 5.6nm ...

    As to how the lower ones can be achieved, or whether they will be achieved, I will not venture a guess.
  • CurseTheSky - Thursday, September 24, 2009 - link

    Thank you for clarifying that. I always wondered how they determined what the next process size would be. It seemed like they picked arbitrary numbers out of a hat, but now I see that:

    65 / 2^(1/2) = 45.96
    45 / 2^(1/2) = 31.82
    32 / 2^(1/2) = 22.63
    etc.

Log in

Don't have an account? Sign up now