System Buyer’s Guide: $1700 Performance Midrange
by Mike Jones and Jarred Walton on May 12, 2010 4:52 AM ESTIntel Performance Midrange System
Since the introduction of Intel’s i5-750 in Q3 09—delivering quad-core performance that tops the i7-920 for significantly less money—reviewers and builders alike have praised its performance, efficiency, flexibility and value. Even as Intel has rounded out their CPU lineup with various Clarkdale CPUs, the i5-750 remains a compelling processor that can serve as the base for a performance/value machine. Compared to our last Intel performance midrange system, enthusiasts can begin their builds with $100 or more of combined CPU and mobo savings in the piggy bank, or use it to beef up other components. Better performance for a substantially lower platform cost? That's music to the DIYer's ears. Here's the basic setup.
At $200, the i5-750 is a terrific bargain. As noted in our Lynnfield article from September 2009, the i5-750 brings quad-core performance that tops the i7-920 in most benchmarks to the significantly less expensive LGA-1156 platform. While the lack of Hyper-Threading costs the i5-750 some performance in well-threaded applications, its aggressive Turbo Modes—which enable the clock speed to rise to 3.2GHz whenever two or more cores are idle—makes it a processor that punches well above its weight in the majority of usage scenarios. The i5-750 is also a great overclocker, but requires overvolting to get anywhere near its full potential. If you’re buying the 750 with anything more than mild overclocking in mind, the retail cooler is not going to be sufficient.
The Gigabyte GA-P55A-UD3 is a feature-rich option for the builder who might want CrossFireX down the road and it comes at a midrange price. It's an excellent choice for an i5-750 system designed to maximize performance, flexibility, and value. Its feature set includes eight USB 2.0 ports with two more headers on the board, and two more USB 3.0 ports on the rear I/O panel. For hard drives, the board has six SATA 3Gbps ports and two more SATA 6Gbps ports. If you want to enable both USB3 and SATA6, the primary GPU slot will drop down to x8 speed, while the secondary x16 slot always runs at x4 bandwidth. For the price, however, it's a very good board and it has good overclocking abilities if you're interested.
Options for Intel 1156 motherboards abound, and we want to mention a few alternatives. First, if you prefer higher performance CrossFire (or you want the potential for SLI), look at the MSI P55-GD65. It provides GPUs dual x8 lanes as opposed to the x16/x4 combination on the P55A-UD3; you also get Firewire support. Though not without a blemish or two, it offers performance and features on par with more expensive offerings and exceptional power consumption characteristics. One major drawback with the MSI board is that tweaking memory timings is an all-or-nothing affair, so if you prefer to set most to "Auto" while only changing a few important items, look elsewhere. For non-CrossFire/SLI setups, the ASUS P7P55D-E LX also boasts USB3 and SATA6 support, with your primary GPU slot always running at x16. Not surprisingly, the P7P55D-E LX is another great overclocking board for this price range, just like most ASUS boards.
All of the boards we mentioned are P55 chipset offerings, which is preferable for overclocking and dual GPU configurations. However, if you don't need a lot of CPU cores and want to save money on your power bills, the H55 chipset boards and Clarkdale CPUs are certainly a great option. You can also get an H55 board and use a Lynnfield CPU as the boards do tend to cost a bit less. The BIOSTAR TH55XE, ASUS P7H55D-M EVO, and Gigabyte GA-H55M-USB3 are all worth a look. Paired with an Intel Core i3-540, they can shave ~5W to 60W off your system power consumption relative to the recommended i5-750 + P55 setup, and the total cost of the system will drop around $100.
On the other end of the spectrum, overclockers and users looking to potentially move to hex-core Intel chips down the road might want to think about X58 and socket 1366. With the Core i7-920, 3x2GB DDR3, and the least expensive X58 motherboard you're looking at a price increase of around $150 and performance that may not be noticeably better in most applications. Still, some will prefer going with the higher-end Bloomfield route.
A nice change since the days of DDR2 vs. DDR3, triple-channel vs. dual-channel memory is that all of the remaining components for our AMD and Intel platforms are the same. You can find additional information about the other parts and accessories on pages four and five. First, let's look at the AMD motherboard and CPU recommendations.
Facebook
Twitter
RSS
102 Comments
View All Comments
knofix - Wednesday, May 12, 2010 - link
I cant figure out what the target audience is for these systems. (OK maybe MAC buyers, since these two systems fall into their price range and maybe the nobrainer-rich kid with lots of dosh to spare)PC gamers would opt for better CPUs and SLI/CF perhaps, audio enthusiasts would sneer at the speakers (they are utter crap, usable for video streams with 5.1 channel sound yes, but they just massacre the audio files in stereo (so do 2.1)), media coders would be satisfied with the 6core and so would creative artists, although I think they would pick double the CPU power these 2 configurations have to offer and be satisfied with the GPU at hand (since Adobe loves GPUs now) but all of the above mentioned groups would hang you for only including 4GB of RAM. All of these groups of users would benefit from having a SSD.
So all of these guys are mid/high end users. And none of those would pick the configuration you bungled up. Verdict - FAIL
Since me being from the EU, I cant possibly imagine how much these two systems would cost here. OK I can. Price x 1.3, lets call it 2K Euros - btw. that would be the equivalent of an OVERKILL systems price in EU. (lets skip the wealthy minority and focus on real people - that is what mainstream means I guess).
killerclick - Wednesday, May 12, 2010 - link
I hate poor people whining all the time about how they can't afford this or that.Anyone know where I can get a diamond encrusted laser mouse?
Ditiris - Wednesday, May 12, 2010 - link
Pretty sure Razer makes that.
Setsunayaki - Wednesday, May 12, 2010 - link
I'm sorry, but most players play games that are 3 - 5 years old and enjoy playing them. They play the occassional new game out there. Sorry,. but the top games are played by such a marginally low population. I'm part of a gaming club that is linked to other gaming clubs in the state and recently the majority of gamers out there were not playing Crysis or Batman.I still have an older system and with my configuration at 1900 x 1200 (and higher resolutions) play top games. Only lackluster thing in here is my aging video card, but for the most part I can get a stable to good framerate.
The majority of people that I know swiched from PC to XBOX360 in order to play games. They don't want to be troubled with frequent upgrading and only care about just playing game. I personaly do not own next generation consoles, but I know many who have made the switch back to consoles lately....
Majority of computer users are not gamers, they do basic things and I can build a system for basics that is $200 - $300, While a lot of parents do not want their kids messing around their hard earned PCs, so they buy them consoles. Until the industry can make enough software and not just enough to count on my fingers....the majority wont care about the highest end software out there...or even the latest action games when anyone can buy a console and be littered with them.
Polizei608 - Wednesday, May 12, 2010 - link
Maybe it's midrange because the person who got it was-MAAAAAAAAAAAAIKKKKKKKKKKKKE JONNNNNNNNNNNNNNNES
numberoneoppa - Wednesday, May 12, 2010 - link
lol'd hard.skrewler2 - Wednesday, May 12, 2010 - link
might want to fix thatFrostburn - Wednesday, May 12, 2010 - link
What is up with the horrible picture for this post? For a moment I thought it was a joke from your very first System Buyer's Guide or something, the worst looking case I've ever seen and a 7 year old 4:3 LCD monitor!Just about anything call fall into the "Midrange" category unless it is the fastest and most expensive parts out there. The system looks more expensive because they are buying a new monitor, keyboard, mouse, surround sound setup and a new OS to go with it. Most PC builders will already have/keep most of this stuff the same when they upgrade their system.
Furuno - Thursday, May 13, 2010 - link
First, I agree it is a midrange from performance perspective, as high end should at least have a "reasonable" i7 and "sane" CF/SLI setup. But please (again) consider that AnandTech is an international website, a midrange system should be (relatively) affordable by most people. Most people in my country even think my $1000 system is "crazy". I know we're might be the minority, but please consider this. Maybe using price range instead of Low/Mid/High moniker...Since most of the people that read AT is tech enthusiast and usually buld their own system. I'd like more "roundups" with (if possible) every component available for each category. For example, roundups of every motherboard with 890GX chipset, not just a "select" model.
Oh and, why you never metion about "other" SSD that exist beside Intel/Indilinx/Crucial/SandForce? What about those Imation/A-Data/Sandisk/etc SSD? Is they're any good?
Best Regards,
Furuno
GullLars - Thursday, May 13, 2010 - link
I'm guessing you mean SSD controllers. Imitation uses Mtron controllers, they are older generation and use SLC only. I have 2 of these Mtron Pro SSDs in RAID from back in 2008 before Intel were avalible. They work well, but they behave a bit different from the new SSDs. For one, Mtron SSD don't support NCQ, they have really low read latency, but fairly low random write (roughly 200-250 IOPS, about the same as a 15K SAS HDD whitout NCQ or shortstroke). In everyday use, they are comparable to Indilinx drives, but are more expensive. The pluss is they have no performance degradation whatsoever. Mine perform just as new after soon 2 years in RAID-0 as a much used system drive.
SanDisk SSDs i don't know a lot about, i haven't seen any info outside marketing campaings. The "vRPM" scheme is a farce. Their netbook replacement drives are likely a bit better than the ones they come with, but nothing like Intel or SandForce.
You also have Adtron SSDs, but i don't know if those are on the market anymore.
JMicron is a controller producer you didn't mention. Their early controllers had major issues with random writes. The new generation, JMF612/618(aka thosiba) have gotten it under controll, but are still limited by not using NCQ. They can be considered low-end. WD has made custom firmware for a line using JMF612 focusing on realiability.
Memoright are also a controller producer, but as far as i know, they only made one model. It was the best consumer SSD out there before Intel, but cost the double of Mtron, wich weren't cheap either (I gave about $1500 for my 2x 32GB Mtrons...).
Samsung has made SSD controllers. They have been OK at sequential performance, but sub-par on random performance. The last controller thay made came out about the same time as Indilinx Barefoot, over a year ago. Indilinx clearly beat it at performance. I haven't heard anything about new controllers from them, but they have invested in (not bought) Fusion-IO, wich makes the most powerfull flash SSD controllers i know of.
The other SSD controllers i know of are exclusively used in the enterprise, like STec, BitMicro, Foremay, TMS, Fusion-IO, etc.