LaCie's 2big Thunderbolt 2 and Rugged Thunderbolt DAS Review
by Ganesh T S on July 9, 2014 6:00 AM EST- Posted in
- LaCie
- Storage
- Seagate
- DAS
- Thunderbolt 2
Introduction
Consumers dealing with multimedia workflows need to transfer large amounts of data around. Be it collecting data in the field or editing media at a workstation, the necessity for fast and accessible direct attached storage (DAS) units can't be stressed enough. LaCie and G-Technology are two vendors targeting this space. Back in April, we had covered the launch of some solutions in this space. Today, we are reviewing one of LaCie's introductions, the 2big Thunderbolt 2. LaCie's Rugged Thunderbolt bus-powered DAS forms a complementary offering for in-field use. Both units offer Thunderbolt as well as USB 3.0 connectivity.
The 2big Thunderbolt 2 is meant for use on the desktop and needs an external power adapter, while the Rugged Thunderbolt comes with a protective covering that enables a IP-54 rating for ruggedness. This ingress protection rating implies that the unit is dust proof and can also withstand water splashes. Our review unit was the 500 GB SSD version, which can also withstand vibrations and shocks. The detailed specification of the two review units are provided in the tables below.
LaCie 2big Thunderbolt 2 9000473U | |
Internal Storage Media | 2x 6 TB 3.5" ST6000DX000 Hard Drives (Hot-Swappable) |
Interface | 2x Thunderbolt 2 + 1x USB 3.0 |
RAID Modes | RAID 0 / RAID 1 / JBOD - Hardware Selection Button |
Cooling | Aluminium Chassis + Noctua 60mm Fan |
Power Supply | 100-240V AC Switching Adapter (12V @ 5A DC) |
Dimensions | 109 x 217 x 130 mm | 4.3 x 8.5 x 5.1 in. |
Weight | 3 kg | 6.6 lbs. |
Included Software |
|
Product Page | LaCie 2big Thunderbolt 2 |
Price | $999 |
LaCie Rugged Thunderbolt 9000491 | |
Internal Storage Media | 500 GB SATA 6 Gbps SSD |
Interface | 1x Thunderbolt + 1x USB 3.0 |
Ingress Protection / Ruggedness |
|
Dimensions | 89 x 140 x 24 mm / 3.5 x 5.5 x 1 in. |
Weight | 280 g | 8.8 oz. |
Included Software |
|
Product Page | LaCie Rugged Thunderbolt |
Price | $500 |
The gallery below shows some of the internal components of the 2big Thunderbolt 2.
Our 12 TB review unit came with two 6 TB Seagate ST6000DX000 Desktop HDDs inside. These retail for around $300 each, and have six platters spinning at 7200 rpm internally. On the board side of things, the Thunderbolt 2 controller is a well-known entity at this point of time, and doesn't appear in the gallery above. Fulfilling the hardware RAID functionality is the ASMedia ASM1092R chip which has two device ports and one host SATA port. The SATA to USB 3.0 functionality is handled by the ASMedia ASM1053E SATA - USB 3.0. We also seem to have a ASMedia ASM1156 chip on the board for which no public documentation exists yet. Our educated guess is that it performs the necessary SATA / PCIe bridging in order to bring the Thunderbolt 2 DL5520 controller into play.
The Rugged Thunderbolt was subject to a much less invasive teardown.
We found a Samsung PM851 2.5" SATA SSD inside. Ideally, to take full advantage of Thunderbolt speeds, it would have been nice to have a PCIe SSD inside, but that premium market is served by the LaCie Little Big Disk. Given the bus-powered nature and the cost, it is not a surprising to find the PM851 inside.the unit.
42 Comments
View All Comments
ciparis - Wednesday, July 9, 2014 - link
Looks like a terrible Thunderbolt implementation on the PC side of things. Too bad, but it renders this review a lot less informative about the drive side of things that it would be if you did a quick Mac comparison to illustrate how a more native implementation can take advantage of these drives.repoman27 - Wednesday, July 9, 2014 - link
Ganesh, the ASM1156 is most likely a SATA 6Gb/s switch (2:1 or 1:2 mux/demux) similar to the ASM1456: http://www.asmedia.com.tw/eng/e_show_products.php?...There should also be a SATA 6Gb/s host controller on the board somewhere, but it doesn't appear to be in any of your photos. The original LaCie Thunderbolt designs used a Marvell 88SE9182. This should show up in Device Manager as well, and I'm curious as to what drivers it was using and what link speed it was reporting. The performance of the SATA host controller vs. the SATA to USB 3.0 bridge is the most likely culprit in terms of why your USB 3.0 speeds were consistently higher than with Thunderbolt. Although they were using a Mac and the Blackmagic Disk Speed Test, StorageReview showed much higher throughput over Thunderbolt in RAID 0 than you were able to achieve with your setup. http://www.storagereview.com/lacie_2big_thunderbol...
If you're going to disassemble the device to take pictures of the internals, it would be much appreciated if you could provide photos of the PCBs in their entirety. Some folks, myself included, are quite interested in seeing the evolution of Thunderbolt device designs.
Also, there's a minor typo in the introduction. The name of the 4C Thunderbolt 2 controller should be "DSL5520", not "DL5520".
repoman27 - Wednesday, July 9, 2014 - link
"Given the bus-powered nature and the cost, it is not a surprising to find the PM851 inside.the unit."Although SSDs with PCIe controllers apparently command a premium at the moment, don't forget that they can be connected directly to a Thunderbolt controller, whereas SATA SSDs require the inclusion of a SATA host controller.
I think there are several more likely reasons for going with SATA. First, they also produce versions of the Rugged with HDDs in them, which aren't available with PCIe interfaces. Second, you can make a dual-interface device like this by using a 1:2 demux and cheap SATA 6Gb/s to USB 3.0 bridge chip.
Although you didn't touch on it in the article, these new tethered cable Thunderbolt designs are actually quite interesting. They're similar to the Apple Thunderbolt to Gigabit Ethernet and Thunderbolt to FireWire Adapters. The DSL2210 Thunderbolt controller is embedded in the Thunderbolt connector, and the cable is actually a PCIe 2.0 x1 cable, not an active copper Thunderbolt cable. You can almost see the end where it connects to the device in one of your teardown photos. Eliminating the active cable saves a considerable amount of money and also uses way less power, leaving up to 9W of the 10W power budget for the device itself.
MikhailT - Wednesday, July 9, 2014 - link
The one thing I'm very curious about is the latency but I can't find any good reviews on this. I was hoping this article will cover it but alas, no.If I put my collection of my virtual machines on those devices, would it be more responsive on USB or TB?
Logically, TB should be much responsive but by how much?
I'm constantly running out of space on my laptop because of the massive VMs and I'd like to get the rugged device here, does anybody think this is a bad idea?
Howard - Thursday, July 10, 2014 - link
IP ratings are not for ruggedness, with arguably the sole exception of IP69K.torp - Thursday, July 10, 2014 - link
Q1: Why nothing about CPU utilization? Back when it was Firewire vs USB 2.0, the difference was horrendously in favour of Firewire. I've personally observed 3% with Firewire vs 30% with USB 2.0 on the same enclosure, which had both options.Q2: (Which has been asked before) Why no OS X tests? I doubt anyone bothers to optimize Windows Thunderbolt drivers because almost no one will use it...
SirPerro - Thursday, July 10, 2014 - link
At this point it's pretty clear that Thunderbolt is a niche for Mac users who are willing to pay top dollar for a non-upgradeable cilinder for which they have to buy top dollar external storage because Apple decided so.For 99,9999% of the above users, USB3 and Thunderbolt performance differences are undetectable in real world cases. No matter how awesome the product is, or is exposed to the world by Apple.
So quick question. Why the fuck the remaining us 99,99999% of the world should care about Thunderbolt and why on earth should the vast majority of OEMs build TB devices?
I say that as a MBP owner which finds it POINTLESS to pay any premium for thunderbolt.
In before the "convenience" comments. I find it pretty inconveninent to pay the $20 tax for Apple cables, and I couldn't care less about having one cable for the monitor and another for the external HDD.
The "convenience" of using the same USB interface as 99,9999% of the world though... that DO is important.
repoman27 - Thursday, July 10, 2014 - link
Thunderbolt is for connecting external PCIe devices or displays. If you're not the type of user that opted to go with PCIe solutions for storage in the past, then you're not likely to be interested in Thunderbolt storage solutions.While the majority of PC usage may be for content consumption and recreation, there's a legitimate percentage of the population for whom PCs represent tools. Just as certain tools are more ideally suited for particular jobs, different PCs and peripherals are better tailored to particular workflows. Complaining about Thunderbolt serving the needs of a minority is like complaining about the existence of any other tool that you personally don't have a current use for. I don't need all the specialized tools that my car mechanic, carpenter, electrician and plumber have, but I do prefer them to have the best tool for the job if and when I require their services. You may not need a Thunderbolt peripheral, but you probably do enjoy the work done by professionals in the content creation, engineering and research fields, whose workflows can benefit tremendously from technologies like Thunderbolt.
Or you can just go ahead and hate on the fastest external I/O interface to ever grace a consumer PC. All PCs already come with USB ports, and that isn't going to change. The whole point of USB is to be fast enough for most uses and as cheap as possible. Thunderbolt allows you to do PCIe 2.0 x4 over a miniDP port. If you don't need to add a PCIe device externally, just ignore the little lightning bolt icon next to the port and use it to connect a display instead.
mschira - Friday, July 11, 2014 - link
Oh give the Mac Pro a break. It may not be a machine for you - it's not my machine either, but I can see people wanting it. And contrary to popular believe it is simply not overpriced. Have you looked at the prices HP or DELL ask for Xeon based workstations? They are BEYOND ridiculous and make the Mac Pro look positively cheap. I am not making this up, go check for yourself.And frankly - who needs internal storage these days anyway?
I don't. I did not long ago, but no more. Our lab has a 5 bay Qnap with RAID 6 for storage. Plenty of space, pretty small and plenty fast for our purpose. We have WD myBook (3 TB and 4TB models) connected via USB3 for archive. Awesome, we put them in the shelf for cold storage. Yes you can do this with plain harddrives, and we did do that with hot adapter boxes - but the boxes are cumbersome and they break. And what when in 5 years getting an SATA interface will be hard? How long will it take until we will have trouble connecting with USB3?
M.
HangFire - Thursday, July 10, 2014 - link
Interesting article, but I'm dissappointed the reviewer didn't test the implementations for vulnerabilities. I have used previous LaCie NAS products and they were immediately flagged by IT's security scanning as having outdated and insecure SSL and SAMBA implementations. I raised these issues with LaCie only to hear crickets.