While we generally avoid going into deep detail when it comes to our display testing, in light of statements that seemingly contradict our testing it becomes important to contextualize our display tests. Many people are often confused by contradicting statements regarding the peak brightness of an AMOLED display, as we will state that the Samsung Galaxy Note 4’s display reaches a maximum of 462 cd/m^2, while other sites often state that the Note 4’s display reaches a maximum of 750 cd/m^2. Another commonly cited discrepancy is that we rate the Nexus 6’s display to reach a peak brightness of 258 nits, while others have rated the Nexus 6’s display to be as bright as 400 nits.

One might immediately assume that one measurement is right, and the other is false. In truth, both measurements are achievable, as we’ll soon see. Before we get into any discussion of testing methodology though, we must first understand how AMOLED and LCD displays work. Fundamentally, LCD and OLED displays are almost completely different from one another, but face similar issues and limitations. LCD is the older of the two technologies, and is fundamentally quite simple, although not quite as simple as OLED. In short, we can view an LCD display as made of a backlight, and a color filtering array which has liquid crystals that control the passage of light, along with polarizers to make sure that the filtering system works correctly.

An Apple iPod Touch music player disassembled to show the array of white-edge LED's powered on with the device / ReTheCat

To break this system down further, we can look at the backlight. In the case of mobile devices, the only acceptable backlight system for thickness and power efficiency reasons is the edge-lit LED, which places a line of LEDs along an edge of the display, which is then diffused through a sheet of transparent material with strategically-placed bumps in the material to create points of light via total internal reflection. For the most part, LEDs in use today are blue LEDs with yellow phosphors in order to increase efficiency, although this means that the natural white point of such a backlight is higher than 6504k and requires filtering in order to reach a calibrated white point.

Schematic diagram IPS LC display / BBCLCD

While the backlight is relatively simple, the actual color filtering is a bit more complicated, although we will avoid extensive depth in this case. In the case of IPS, the structure is generally quite simple in nature, with two electrodes in plane with each other, which is used to generate an electric field that rotates the orientation of the liquid crystals in plane with the display to dynamically alter the polarization of the light that can pass through the liquid crystal array. With a set of fixed polarizers before and after the liquid crystal array, by using the controlling TFTs to alter the voltage applied on the electrodes one can adjust individual color output on a per-pixel basis.

Schematic of a bilayer OLED: 1. Cathode (−), 2. Emissive Layer, 3. Emission of radiation, 4. Conductive Layer, 5. Anode (+) / Rafał Konieczny

AMOLED is a fundamentally different approach to the problem, which uses organic emitters deposited upon a substrate. These emitters are designed to emit red, green, or blue when voltage is applied across two electrodes. Similarly, TFTs are needed to control each pixel. As one can see, AMOLED is a simpler solution, but in practice the issues with such an implementation can be quite complex.

In order to determine what picture content to use for a measurement of maximum brightness, we must turn to a measurement known as Average Picture Level (APL). This is best explained as the percentage of the display that is lit up compared to a full white display, so a display that is completely red, green, or blue would be 33% APL.

As one might already be able to guess, with AMOLED power consumption is highly dependent upon the content displayed. With a pure white image, every pixel must be lit, while with a pure black image every pixel is off. As the display typically has a maximum power use set for a mobile device, this opens up the capability for AMOLED displays to allocate more power per pixel (i.e. higher maximum luminance) when not displaying a full-white image. This is in contrast with the edge-lit LCDs used in mobile displays, which have relatively limited local-dimming capabilities. As a result, the maximum brightness of an LCD is relatively fixed, regardless of the displayed content.

In the case of the Nexus 6, we can clearly see dimishing returns after 40% APL as there is efficiency droop on AMOLED displays that are similar in nature to LED backlights. While now it’s easy to understand why it is that AMOLED can vary in maximum brightness, the question is which brightness is “correct”. While an AMOLED display can technically have a maximum brightness of 750 nits, it’s unlikely that people will look at images effectively equivalent to 1% of the display lit up with white.

In practice, it turns out that with Lollipop and almost all web pages, the average picture level is quite high. It’s increasingly rare to see cases where displayed content is below 50% APL. According to Motorola, 80% APL represents an average APL for light UIs and in light of this, it seems appropriate to test at similarly real-world APLs. Taking a look at some commonly used applications in Lollipop, we see that the APL is regularly at or above even Motorola's 80% figure. I opened some of the applications on my Nexus 6's homescreen to take screenshots of whatever they had open when they came up, and I've tabulated the results below.

  APL in %
Messenger 86
Calculator 49
Settings 84
Calendar 80
Phone 89
Reddit Is Fun (Light) 77
Reddit Is Fun (Dark) 23
Chrome New Tab 86
Wikipedia 83
AnandTech 52
AnandTech Article 81
Twitter 76

As you can see, many of the screens in Android's interface as well as web pages and third party apps have a high APL. There are exceptions, like the Calculator application and any application with a dark theme, but the overall trend is clear. Google's new interface style also means that applications are more likely to adopt interfaces with large amounts of white than in the past. 

As a result of this, we test at 100% APL in order to get an idea of perceived brightness. While there may be some need for lower APL testing, it’s important to also consider cases such as OLED aging which will lower peak brightness over time. It's also important to consider that the delta between 80% APL and 100% APL in this case is around 44 nits. This makes for about an 18% delta in brightness, which ends up being around the noticeable difference in most cases. While our testing is subject to change, in the case of brightness we currently do not see much need to dramatically alter our methodology.

POST A COMMENT

85 Comments

View All Comments

  • mkozakewich - Wednesday, December 24, 2014 - link

    No, black themes don't look good. What you want is an actual 'dark' theme, which will probably contain more brown or (lighter) navy than actual black. There are some very nice darker colour themes. Reply
  • sireangelus - Friday, December 26, 2014 - link

    to me, they are not supposed to look good. They are supposed to let your eyes rest, and in fact i hate how on anandtech the background is white- it burns my eyes. Reply
  • DiHydro - Monday, January 5, 2015 - link

    The background on this website is not pure white, it is f6f6f6 in hex, which is about 96% white. You should calibrate or turn down the brightness on your monitor. Reply
  • dylan522p - Monday, December 22, 2014 - link

    That Chart you made with Brightness and APL is something you need in EVERY AMOLED device's review. Reply
  • psychobriggsy - Monday, December 22, 2014 - link

    This is one downside of Material Design, at least currently where it only has a light theme - you use more power driving the display, or have an overall dimmer display (at similar power use).

    Maybe there isn't a lot of real world savings to be had from having a dark theme rather than light theme these days for OLED... it would be interesting to see how much battery life is saved from using a 30% APL UI versus as 80% APL UI.
    Reply
  • AnnihilatorX - Monday, December 22, 2014 - link

    From the applications APL list, it seems to me 80% is about the average, and would be a good one to aim for in reviews.

    This article could be written better, I am still a little bit confused why lower APL means higher brigtness. Surely, as the screen has more dark content, the brightness will drop? Also, the acronym APL was mentioned first before it was defined, that's bad editing!
    Reply
  • krutou - Monday, December 22, 2014 - link

    The article reads just fine.

    Lower APL (% of pixels lit) on an AMOLED means the display can disable some pixels and turbo (much like on a CPU), the remaining pixels.
    Reply
  • 3DoubleD - Monday, December 22, 2014 - link

    I thought the article was a bit rough as well, especially the APL acronym showing up before the definition.

    I think it is also confusing why brightness increases with lower APL. Consider the 100% APL situation... let's say it produced 100 nits. Now consider a 1% APL situation. If the PIXEL brightness is kept the same, we should see 1 nit. Now we consider the fact that we can increase the TOTAL brightness because we have power headroom. The only way we could increase beyond 100 nits is if we can increase the PIXEL brightness by a factor of more than 100.

    So what is not very clear is how having a lower APL leads to higher TOTAL brightness. In the 1% APL situation, is the pixel being driven more than 100x brighter than normal??? That seems pretty absurd. So either we don't understand how the brightness measurement is being performed or it is not clear that each pixel has >100x brightness headroom.
    Reply
  • Brandon Chester - Monday, December 22, 2014 - link

    "With a pure white image, every pixel must be lit, while with a pure black image every pixel is off. As the display typically has a maximum power use set for a mobile device, this opens up the capability for AMOLED displays to allocate more power per pixel (i.e. higher maximum luminance) when not displaying a full-white image."

    Josh wrote this but I don't really know how to explain it any clearer, it seems to explain itself fine to me.
    Reply
  • Minion4Hire - Monday, December 22, 2014 - link

    What are you talking about?

    It's not about a higher total brightness of every pixel of the display, it is about higher per pixel and perceived brightness.

    Display calibration and measurement tools don't take in all of the light from the display at once. You're effectively placing a small camera onto the screen, not placing the entire display into an enclosed box. These tools only measure a small section of the display at a time.

    You're looking at this from the wrong perspective. OLED screens are more capable than the phones they are in will allow them to be since there is a cap placed on power consumption because of their designed mobile use. Let's say that a given OLED screen is capable of 1000 nits, but that would consume 10W of power. The phone manufacturer wants to limit the screen's overall power consumption and caps it at 4W instead. But one half of the screen could be using 3Ws while the other half only uses 1W.

    There are two things that can change the perceived and measured brightness - the fact that individual white pixels can become brighter if portions of the display are dimmer as well as the fact that OLED panels are inefficient when it comes to illuminating more/all of the screen at once compared to smaller portions.

    So if two different reviewers placed their light sensor on a white portion of the screen, but one of the testers had their screen displaying all white, and the other reviewer only had a partially white screen, the latter is going to get a higher brightness reading. Even if measuring over text (which is mostly empty/white space) any ad on a website or colorful banner is going to allow more power to be used by the white pixels, increasing brightness.

    So the "real world" testing of other sites can absolutely report more nits than the 100% testing done here.
    Reply

Log in

Don't have an account? Sign up now