BitFenix Shinobi: The Budget Ninja
by Dustin Sklavos on June 22, 2011 12:45 AM EST- Posted in
- Cases/Cooling/PSUs
- mid-tower
- bitfenix
- shinobi
Testing Methodology
For testing ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
Full ATX Test Configuration | |
CPU |
Intel Core i7-875K (95W TDP, tested at stock speed and overclocked to 3.8GHz @ 1.38V) |
Motherboard | ASUS P7P55D-E Pro |
Graphics Card | Zotac NVIDIA GeForce GTX 580 (244W TDP) |
Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
Drives |
Kingston SSDNow V+ 100 64GB SSD Western Digital Caviar Black 1TB SATA 6Gbps Samsung 5.25" BD-ROM/DVDRW Drive |
CPU Cooler | Zalman CNPS9900 MAX with Cooler Master ThermalFusion 400 |
Power Supply | SilverStone Strider Gold 750W 80 Plus Gold |
A refresher on how we test:
Acoustic testing is standardized on a foot from the front of the case, using the Extech SL10 with an ambient noise floor of ~32dB. For reference, that's what my silent apartment measures with nothing running, testing acoustics in the dead of night (usually between 1am and 3am). A lot of us sit about a foot away from our computers, so this should be a fairly accurate representation of the kind of noise the case generates, and it's close enough to get noise levels that should register above ambient.
Thermal testing is run with the computer having idled at the desktop for fifteen minutes, and again with the computer running both Furmark (where applicable) and Prime95 (less one thread when a GPU is being used) for fifteen minutes. I've found that leaving one thread open in Prime95 allows the processor to heat up enough while making sure Furmark isn't CPU-limited. We're using the thermal diodes included with the hardware to keep everything standardized, and ambient testing temperature is always between 71F and 74F. Processor temperatures reported are the average of the CPU cores.
For more details on how we arrived at this testbed, you can check out our introductory passage in the review for the IN-WIN BUC.
Last but not least, we'd also like to thank the vendors who made our testbed possible:
Thank You!
We have some thanks in order before we press on:
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory we used to add memory thermals to our testing.
- Thank you to Zalman for providing us with the CNPS9900 MAX heatsink and fan unit we used.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Western Digital Caviar Black hard drive, Intel Core i7-875K processor, ASUS P7P55D-E Pro motherboard, and Samsung BD-ROM/DVD+/-RW drive.
- And thank you to SilverStone for providing us with the power supply.
26 Comments
View All Comments
IvanChess - Wednesday, June 22, 2011 - link
I know bottom mounted PSUs are all the rage but with two front 120s, a top mounted PSU would let this case have an intake inline with the CPU and another intake inline with the GPU. I wonder if that would help the thermals.Impulses - Wednesday, June 22, 2011 - link
That's one thing I like about the cheap Thermaltake M9 I'm using... PSU is in the traditional top location and the drive bays are ALL actually 5.25" bays top to bottom, it comes with a 3.5" drive cage that you can slide into any three of the 5.25" bays (or was it two, I forget) and the same cage mounts a 120mm fan up front...So I put a DVD burner and card reader up top in line with the PSU, and directly below those I placed the 3.5" drive cage with a fan, and no drives. Hence, I've got a 120mm intake there that blows right across the memory and into my tower HSF, which blows directly unto an exhaust.
I mounted my SSD into a 5.25" bay with a 2.5" to 5.25" adapter (holds two drives so I have the option of going RAID eventually), and I slapped my 3.5" data HDD unto a foam slab on the case floor on the last 5.25" bay, held in place with velcro straps (something I've been doing for years to decouple drives and minimize noise, works better than any grommets or stock soft mount).
I thought about getting another cage for an intake fan for the GPUs but instead I used the lower fan mount on the stock windowed panel of my case, which paces the fan right by the CF GPU's intakes anyway... Air travels in sort of an L from there thru the back GPU exhausts but it does that anyway within the heatshroud, so a front intake wouldn't be any more direct.
Impulses - Wednesday, June 22, 2011 - link
Nice review, but I don't understand why you chose to test it with the 3.5" drive where you did... It's a budget case, so most people are probably not gonna run SLI/CF on it, and you weren't doing so either so there was no need to have the hard drive blocking all airflow. Having in any of the lower slots would probably lead to significantly lower temps overall. Between that and no side intake or top exhaust (i understand they aren't included), it just seems like you decided to test the worst possible configuration imaginable. If I was BitFenix I definitely wouldn't be pleased...Impulses - Wednesday, June 22, 2011 - link
If you move the intake fan to the higher mounting position and/or place the hard drive in one of the bottom bays it'd definitely run cooler overall (looks like some airflow would leak to the top thru the gap left between the GPU and the bays), the hard drive wouldn't interfere with SLI/CF there and it's not gonna sit in a dead hot spot with the PSU pulling done air out right next to it.If you were to add fans you could just leave the hard drive and intake where they are (to help create two distinct zones), invert the rear fan into an intake, and add a top exhaust. Either way, you literally tested the worst possible configuration... Are we assuming that DIY builders are clueless and can't play around a little with fan/drive placement?
Don't get me wrong, the review was great overall, typical Anandtech (you go into way more detail about the product than 95% of sites out there), but I definitely find the tested config to be a poor choice.
Dustin Sklavos - Wednesday, June 22, 2011 - link
The reason why I tested it in this configuration was partly because it made the cabling a bit easier, but also because I deliberately did...maybe not want to handicap it necessarily...but produce a less than ideal scenario so that we could see how it might perform under those circumstances. Sort of like saying "this is as bad as it'll get." Even our thermal tests are a worst case scenario by running Prime95 and FurMark in tandem.I don't think the Shinobi performed that badly, either, honestly. The Antec Sonata IV was a disappointment; working with the Shinobi was a delight and with enough fans (and the right fans), it could be a stellar cool-and-quiet enclosure. I keep seriously considering moving my rig from my Corsair 600T into the Shinobi actually just because of how much I like how it looks and how easy it is to work with.
Lunyone - Wednesday, June 22, 2011 - link
I haven't read the other case reviews that your referring to, but did you/someone test with a similiar frame of mind (worst configuration possible)?? I hope the other cases were test in the similar way, otherwise I'd consider your methods to be a bit sketchy. I do like the subtle look myself and appreciate a case that is like that (CM 690 anyone?). I have worked with several different types of cases (mostly budget ones) and have grown to like tool-less ones for the most part. I like the way the CM 690 is (comes w/3 fans) and can be found for around $70 on sale. This BitFenix case seems like a pretty well built and if priced right will be one that I might purchase in the future. If this case can sell for around $50 on sale than I can see this flying off the shelves!Dustin Sklavos - Wednesday, June 22, 2011 - link
Part of the problem is that other enclosures can't really be handicapped as badly in this way either. I suggested to the BitFenix rep that the drive cages be rotated laterally, which would effiectively eliminate the clearance issue that blocks some of the airflow.In retrospect I do think I was a bit too harsh in testing this one, and part of that was in wanting to push it as hard as I could. I may wind up revisiting it in the future, as like I said before I'm very fond of what BitFenix has done here. This is a classy case and I don't doubt it can perform better than it did in this review and I'd be more than comfortable in recommending it. The windowless version sells for $59: you sacrifice the hard drive clamps and the side window (with vent), but at $59 I have a hard time thinking of a better deal.
Zoomer - Wednesday, June 22, 2011 - link
How about adding the Antec 300? It routinely sells for under $50; I got mine for $35. You'll have too add fans to the front though.dac7nco - Wednesday, June 22, 2011 - link
OK Dustin,I'll BUY you the BitFennix Shinobi, including shipping, with some nice quiet fans. You can send me your 600T in return.
Daimon
iuqiddis - Wednesday, June 22, 2011 - link
Is there any chance you can change the fan configuration or add a fan and redo some of the thermals? I'd be very curious to see whether inclusion of an extra fan would make a noticeable difference. Thanks.