Cooler Master Elite 120 Advanced Case Review: Little in Almost Every Way
by Dustin Sklavos on July 26, 2012 3:01 AM EST- Posted in
- Mini ITX
- Cases/Cooling/PSUs
- Cooler Master
Testing Methodology
For testing Mini-ITX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise. Again, note that while the GD07 can technically fit a full-size ATX motherboard, it's not tall enough to allow for our testbed's tower cooler. Because of the discrepancies that would make for in testing, plus the fact that media center cases are often mini-ITX designs, we have chosen to use our mini-ITX testbed rather than going with a specialized (e.g. not something you can compare directly to our other cases) ATX build.
Mini-ITX Test Configuration | |
CPU |
Intel Core i3-2120 (65W TDP) |
Motherboard | Zotac Z68ITX-A-E |
Graphics Card |
Intel HD 2000 IGP Zotac GeForce GTS 450 Eco (dedicated) ASUS GeForce GTX 560 Ti DCII TOP (dedicated extra) |
Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
Drives |
Kingston SSDNow V+ 100 64GB SSD Samsung 5.25" BD-ROM/DVDRW Drive |
Accessories | Corsair Link |
CPU Cooler | SilverStone NT07-1156 with Cooler Master ThermalFusion 400 |
Power Supply | SilverStone SFX ST45F 450W |
Each case is tested with just the Core i3's integrated graphics as well as with a discrete graphics card. The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running four threads in Prime95 (in-place large FFTs) on the CPU, and OC Scanner (maximum load) is run when the dedicated GPU is installed. At the end of fiteen minutes, thermal and acoustic results are recorded. If the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
We try to maintain an ambient testing temperature of between 22C and 24C. Non-thermal test results aren't going to be directly comparable to the finest decimal point, but should be roughly comparable and give a broader idea of how the enclosure performs.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i3-2120.
- Thank you to Zotac for providing us with the Z68ITX-A-E motherboard and GeForce GTS 450 Eco.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Corsair for providing us with the Corsair Link kit.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Samsung BD-ROM/DVD+/-RW drive.
- And thank you to SilverStone for providing us with the power supply and NT07-1156 heatsink/fan combo.
65 Comments
View All Comments
IlllI - Thursday, July 26, 2012 - link
this thing is hideous!dave1_nyc - Thursday, July 26, 2012 - link
Maybe it just doesn't photograph well, and of course beauty is in the eye....Maybe it just doesn't photograph well.
mlmangum - Thursday, July 26, 2012 - link
Yikes, that thing is uggo... course everyone's entitled to their own opinion. I prefer the understated, stylish aesthetic of the FT03-Mini over this.GotThumbs - Thursday, July 26, 2012 - link
Let be realistic here. It's a computer case and sells for $50.00. If your looking for a high-fashion computer case...then just pony up and pay more.What I find nice about this case is it seems it would be a good candidate for a home-server. It has the capacity to hold four drives (No need for Optical drive) and takes a standard PS.
The only weakness I see is the thermals. An easy fix for anyone who has a dremal and decent fan/grill combo handy. Children (includes IIIII), ask your mother first before attempting.
I modded an APEX MI-008 to hold four 3.5 drives (hang like four slices of bread in a toaster) and added a quiet 80mm fan that gently blows on the drives. Zero heat issues and its been running 24/7 for a couple of years now. This case would have been a breeze to setup with the same hardware.
I'll keep this in mind as I'm thinking of using an AMD APU Itx system to replace my current Atom based MB.
Good review, but the photos could due with being a bit sharper. Next time.
Best wishes.
Scannall - Thursday, July 26, 2012 - link
But I'm sure it has a nice personality...mgl888 - Thursday, July 26, 2012 - link
Really? I don't think it looks bad at all. Nothing flashy but definitely not hideous. Looks rather clean IMOn13L5 - Sunday, August 26, 2012 - link
true...and a blatant SG05 ripoff to boot
both are kinda cheaply made.
davos555 - Thursday, July 26, 2012 - link
Just wondering if anyone has released any ITX Z77 boards -I think Asus has one P8Z77-I Deluxe. It's a bit too pricey thought, I don't need all the features (wifi etc). Are manufacturers planning to release more? Im in the UK, so if anyone has any localised info...I dont really want to go along the H77 route as I believe these don't offer multiplier overclocking.
Menty - Thursday, July 26, 2012 - link
Yeah, there's the Asus one and an ASRock Z77E-ITX that I'm aware of, as well as a handful of older Zotac Z68 boards. Quite spotty availability in the UK, but you can find them somewhere usually :).Brenex - Thursday, July 26, 2012 - link
There is a Zotac Z77 itx board out on their site. Just got one in.