The front is fairly simple with power and reset switches and two lights - blue for power and orange for drive accesses. The lower part of the fascia has cutouts for optical SPDIF audio output, a microphone input, a headphone jack, two USB 2.0/1.1 ports and an IEEE-1394a (Firewire) port.


Click to Enlarge

Spinning the box around, we see a good number of ports; starting with the top row (from left to right) we have two serial ports, a 10/100 Ethernet jack and a PS/2 mouse port. On the very right there's the usual set of 1/8" analog audio connectors that can be remapped to give you analog 5.1 channel outputs. Moving on to the bottom row of connectors, you can pick out (from left to right) a VGA connector, an optical SPDIF output, two IEEE-1394a (Firewire) connectors, two USB 2.0/1.1 ports and finally a PS/2 port for a keyboard. We would like to see more USB ports on the rear, especially considering that the chipset supports two more than are used by the SS51.

The two slot cutouts on the right are indicative of what we're going to see on the inside of case in terms of expansion.

However, as is the case with most things, the beauty of the SS51 lies on its inside and is only hinted at by its stylish exterior. It's time to dissect the SS51.

Introducing the SS51 The Motherboard - Shuttle's FS51
Comments Locked

1 Comments

View All Comments

  • jbratton - Tuesday, September 16, 2003 - link

    My advice a a Shuttle Customer... DO NOT RISK IT !
    There are lots of other vendors with integrity out there. The jokers I've delt with at Shuttle in the US void any warranty they claim ! Im my experience with them I can count on an unneeded flashing bios.. If thats the problem.. than your ok.. ortherwize.. you're on your own.. after a couple of attempts..forget it.. your warrantys expired !! - A Joke they play on us !

Log in

Don't have an account? Sign up now