HP Unveils Third-Gen All-In-One Z1 Workstation: 4K Display, Intel Xeon, Professional Graphics
by Anton Shilov on April 25, 2016 7:30 AM ESTHP last week introduced its third-generation HP Z1 all-in-one workstation. The new system offers higher performance than its predecessor as well as a 4K resolution display. The new Z1 is also significantly more compact compared to prior two generations of HP’s Z1 machines, but retains upgradeablility and a serviceable design. In a bid to make the system smaller and slimmer, HP had to shrink the size of the display and move to a purely M.2/2.5-inch storage platform.
The HP Z1 G3 AIO workstation features 23.6” IPS display panel with 4K (3840×2160) resolution at a 60 Hz refresh rate, a rated 300 nits maximum brightness, 1000:1 contrast ratio as well as 178°/178° horizontal/vertical viewing angles. For comparison, the first and the second generations of HP’s Z1 featured 27” monitors with 2560×1440 resolution, but with the new incarnation of its AIO workstation the company preferred to install a smaller display panel to make the system more compact, increasing the PPI from 108.8 to 186.7.
Specifications of HP's Z1 Workstations | ||||
Z1 G2 | Z1 G3 | |||
Display Panel | 27" IPS | 23.6" IPS | ||
Display Resolution | 2560 x 1440 | 3840 x 2160 | ||
CPU | Intel Xeon E3-1281v3 Intel Xeon E3-1246v3 Intel Xeon E3-1226v3 Intel Core i7-4790 Intel Core i5-4590 Intel Core i3-4160 Intel Core i3-4170 |
Intel Xeon E3-1270 v5 Intel Xeon E3-1245 v5 Intel Xeon E3-1225 v5 Intel Core i7-6700 Intel Core i5-6500 Intel Core i3-6100 |
||
Chipset | Intel C226 | Intel C236 | ||
GPU | Intel HD Graphics 4400 (Core i3) Intel HD Graphics 4600 (Core i5) Intel HD Graphics P4600 (Xeon E3-12x5v3) NVIDIA Quadro K610M 1 GB NVIDIA Quadro K2100M 2 GB NVIDIA Quadro K3100M 4 GB NVIDIA Quadro K4100M 4 GB |
Intel HD Graphics 530 (Core) Intel HD Graphics P530 (Xeon E3) NVIDIA Quadro M1000M 2 GB NVIDIA Quadro M2000M 4 GB |
||
RAM | Up to 32 GB of DDR3L-1600 | Up to 64 GB of DDR4-2133 ECC with Core i3 and Xeon |
||
Storage | 2 x 2.5" or 1 x 3.5" HDDs 1 x mSATA SSD |
2 x 2.5" 2 x M.2-2280 |
||
ODD | Blu-ray or DVD burner (if no Thunderbolt module installed) |
No | ||
Slots | 1 MXM 2 mini-PCIe/mSATA (full-length) |
1 MXM 2 M.2 for SSDs 1 M.2 for WLAN |
||
Gigabit Ethernet | Intel I217LM | Intel I219LM | ||
Wi-Fi and BT | Intel 2x2 7260 802.11ac w/ BT4.0, mini-PCIe |
Intel 2x2 8260 802.11ac w/ BT4.2 PCIe |
||
USB | 2 x USB 3.0 4 x USB 2.0 |
6 x USB 3.0 2 x USB 3.1 Type-C |
||
Thunderbolt | Thunderbolt 2 2 ports (if no ODD installed) |
Thunderbolt 3 2 ports via Type-C |
||
Audio | 4 built-in speakers, microphone, audio connectors | 4 built-in speakers with DTS Studio Sound, microphone audio connectors | ||
Webcam | 1080p | |||
Power Supply | 400 W | 330 W | ||
Dimensions (HxWxD) | 20.8 x 26 x 16.5 inches 52.83 x 66.04 x 41.91 cm |
23.5 x 8.3 x 21.5 inches 59.69 x 21.08 x 54.61 cm |
||
Weight | 47 lbs 21.3 kilograms |
23.2 lbs 10.51 kilograms |
||
Starting Price | from $1999 | from $1498 | ||
Launch | 2014 | 2016 |
The new HP Z1 G3 is based on the Intel Xeon E3 v5/Core i3/i5/i7-series (Skylake) processorsas well as the Intel C236 PCH (platform controller hub). The new AIO workstation can be equipped with up to 64 GB of DDR4-2133 SO-DIMM memory (ECC is supported only by the Xeon and the Core i3 CPUs), up from 32 GB of DDR3 supported by the previous-gen model. The graphics sub-system of the new HP Z1 G3 relies on either Intel’s HD Graphics 530/P530 cores (Gen 9, 24 EUs), NVIDIA’s Quadro M1000M 2 GB (512 stream processors) or M2000M 4 GB (640 stream processors) professional graphics adapters. Since the predecessors of HP’s Z1 G3 relied on low-power professional graphics adapters from NVIDIA in MXM 3.1 form-factor, it is not surprising that the company decided to install similar cards this time.
Storage in the HP Z1 G3 is something that was significantly redesigned compared to previous generations. The new workstation supports up to two 2.5” HDDs or SSDs with SATA 6 Gbps interface as well as up to two HP Z-Turbo Gen 2 NVMe SSDs in the M.2 2280 form-factor and both with PCIe 3.0 x4 interface. As a result, the Z1 G3 has inherently faster storage system than its predecessors (which did not support PCIe 3.0 SSDs), albeit without the opportunity for a large 3.5-inch mechanical. When it comes to storage space, not everything is that easy. HP itself installs SSDs and HDDs with up to 1 TB capacity, hence, it can equip its Z1 G3 machine with up to 4 TB of storage. However, since there are M.2 SSDs and 2.5” HDDs and SSDs with over 1 TB capacities, end-users could install such drives themselves due to tool-less upgrade and maintenance capabilities. Hardware RAID is supported only for 2.5” HDDs and not everything is clear with software RAID for M.2 drives. Moreover, the system no longer has an internal optical drive.
As for input/output capabilities, the new HP Z1 supports two Thunderbolt 3 ports (the number of controllers is unknown, could either be one controller per port or one controller for both) to connect USB-C and TB3 peripherals as well as external displays. There are also six USB 3.0 ports (one supports charging), one SD 4.0 media card reader, a DisplayPort 1.2 connector and a TRRS connector for headsets. Networking and wireless capabilities look standard for today’s workstations: one Intel I219LM Gigabit Ethernet controller as well as one Intel 8260 Wi-Fi 802.11ac with Bluetooth 4.2 module (installed into its own M.2 slot, thus, does not impact storage options). The system also has four internal stereo speakers with DTS Studio Sound software enhancement.
HP announced its first-generation Z1 AIO workstation back in early 2012. The machine was based on the Intel Xeon E3 v3 or the Intel Core i3/i5 processors (Ivy Bridge), NVIDIA’s mobile Quadro graphics and featured a 27” display panel, an optical drive (or an optional Thunderbolt module) module, desktop-class DDR3 DIMMs, SATA HDDs and so on. The HP Z1 G1 received the first ever 10 out of 10 AIO repairability score from iFixit because it was possible to replace all internal components (even its display panel) fairly easy. The downside of Z1’s architecture was its weight and cost. The maximum weight of the system with stand was around 21.3 kilograms and the cost started at $1899. The HP Z1 G2 followed its ancestor in many ways. However, its weight was still around 21.3 kilograms and the price started at $1999.
When designing the third-generation of its Z1 workstations, HP engineers tried to make the system lighter, thinner and more affordable. They decided to go with a smaller (yet, higher-resolution) display panel, SO-DIMMs rather than full-sized memory modules, removed the optical drive and also lost the 3.5” HDD bay. The result is evident: the system weighs 10.51 kilograms and is two times thinner than its predecessors. The cost of the workstation starts at $1498 in its basic configuration, which is lower compared to the Z1 and the Z1 G2. HP advertises tool-less upgrades and maintenance, but it remains to be seen whether the Z1 G3 is as easy to repair as its predecessors.
The HP Z1 workstation will be available from May.
Source: HP
27 Comments
View All Comments
nedjinski - Monday, April 25, 2016 - link
Confused by why weight is a big issue? It was brought up three times. This thing sits on a desk and is not likely to get picked up and moved around everyday, so who cares what it weighs and why?Spunjji - Tuesday, April 26, 2016 - link
Customer requirement. The 1st gen 27" Z1 weighs 25Kg - this necessitated a huge foot on the desk, limited its compatibility with adjustable desk-mounted arms and made it an absolute pig to relocate or service.FreihEitner - Monday, April 25, 2016 - link
I'm in love. I wish it ran MacOS X. This seems WAY better than any iMac (user-servicable is the big win for me), and yeah Apple's constant drumbeat of thinner is always better even when it's a desktop you aren't likely to ever carry around. Man I want one of these but man I don't want to move to Windows 10.star-affinity - Tuesday, April 26, 2016 - link
Except that the 27" iMac offers a 5K display i guess?star-affinity - Tuesday, April 26, 2016 - link
I guess (with a capital I).B166ER - Tuesday, April 26, 2016 - link
Dat bezel tho....hanselltc - Wednesday, May 16, 2018 - link
I understand this is workstation and blah blah blah but this is a REALLY ugly machine.