The desktop computing market as a whole has been subject to severe challenges over the last few years. The ultra-compact form-factor (UCFF) PC market that emerged with the introduction of the Intel NUCs (Next Unit of Computing) has been one of the few bright spots. PC gaming has been one of the few other markets that has withstood the overall issues. The small size of UCFF PCs usually made discrete GPUs difficult to integrate, and iGPUs have not impressed the gaming crowd. Therefore, the market has not seen many products targeting the gaming market while also being compact. This year, we have a new entrant in that category - Intel's Skull Canyon NUC, the NUC6i7KYK, places a 45W TDP Core i7-6770HQ with Iris Pro graphics in a chassis around twice the size of the standard NUC.

Introduction

In the course of our coverage of mini-PCs, we have seen offerings from vendors such as ASRock, GIGABYTE and Zotac targeting the gaming market. Usually, 'mini' doesn't fit the requirements of consumers in this space, but the appearance of power-efficient high performance GPUs have made the offerings in the gaming mini-PC space quite interesting. The Intel Skull Canyon NUC6i7KYK aims to go one step further by taking the discrete GPU out of the equation and reducing the size of the system as compared to the ASRock VisionX and Zotac ZBOX E-series units.

Skull Canyon has a slightly bigger footprint compared to the traditional NUCs, coming in at 211mm x 116mm x 28mm (compared to the 115mm x 111mm x 32mm of the NUC6i5SYK). Unlike the plain industrial design of the traditional NUC chassis, Skull Canyon goes for slightly more stylish design. The default lid comes with a skull logo on top (Intel's products targeting the gaming market have traditionally included that logo), though the package also includes a lid without the logo. Additional items in the kit include a VESA mount and screws for the same, as well as a 120W (19V @ 6.32A) power brick with a separate power cord. A quick-start manual provides directions on how to add memory and SSDs to the unit.

Intel provided us with an engineering sample of the NUC6i7KYK with DDR4 SODIMMs and a M.2 SSD pre-installed. The specifications of our review unit are summarized in the table below.

Intel NUC6i7KYK (Skull Canyon) Specifications
Processor Intel Core i7-6770HQ
Skylake-H, 4C/8T, 2.6 GHz (Turbo to 3.5 GHz), 14nm, 6MB L2, 45W TDP
Memory Micron 16ATF1G64HZ-2G1A2 DDR4
15-15-15-36 @ 2133 MHz
2x8 GB
Graphics Intel Iris Pro Graphics 580
Disk Drive(s) Samsung SSD 950 PRO
(512 GB; M.2 Type 2280 PCIe 3.0 x4 NVMe; 40nm; MLC V-NAND)
Networking Intel Dual Band Wireless-AC 8260
(2x2 802.11ac - 866 Mbps)
Intel Ethernet Connection I219-LM GbE Adapter
Audio 3.5mm Headphone Jack
Capable of 5.1/7.1 digital output with HD audio bitstreaming (HDMI)
Miscellaneous I/O Ports 4x USB 3.0
1x Thunderbolt 3 / USB 3.1 Gen 2
1x SDXC
Operating System Retail unit is barebones, but we installed Windows 10 Pro x64
Pricing (As configured) $1027
Full Specifications Intel Skull Canyon NUC6i7KYK Specifications

The Intel NUC6i7KYK (Skull Canyon) kit doesn't come with any pre-installed OS. Our evaluation was done with Windows 10 Pro x64, with all the latest patches installed. All the drivers, except for the GPU, were downloaded off the Skull Canyon product page. The latest GPU drivers for the Iris Pro Graphics 580 were downloaded from the GPU-specific page. The gallery below shows the various features of the chassis as well as the teardown pictures for lid replacement / memory / SSD installation.

Important aspects to note in the above pictures include the USB 3.0 header visible in the opening beneath the top lid (perfect for third-party lids to take advantage) and the WLAN antennae glued to the top on the front side. It is heartening to see Thunderbolt back after its first and only appearance in the first-generation NUC. The dual M.2 slots are also interesting, and this brings us to the next topic - the board layout.

Platform Analysis and BIOS Features

The NUC6i7KYK uses a Skylake-H CPU in conjunction with the H170 platform controller hub (PCH). The board layout (how the various I/Os communicate with the CPU) is shown below. Of particular interest is the placement of the M.2 slots and the Alpine Ridge Thunderbolt 3 controller.

It is good to see that the SDXC slot is enabled by a PCIe SD card controller (PCIe x1), and not via a USB 2.0 bridge. Intel specifies support for UHS-I speeds. The two M.2 slots are off the PCH. This is understandable since the SATA links that must be multiplexed with the PCIe lanes are going to come off the PCH and the high-speed I/O lanes are shared.

The disappointing aspect here is that the Alpine Ridge controller hangs off the PCH, and not the CPU. Given that a dGPU can only be attached to the system via the Thunderbolt 3 port, it would have made sense to connect it direct to the CPU. This also means that all the high-speed peripherals that can be attached to the NUC6i7KYK are bottlenecked by the DMI 3.0 link between the CPU and the PCH when it comes to exchanging data with the CPU. In the Skylake-H / H170 setup, this link is effectively PCIe 3.0 x4 in terms of bandwidth.

Moving on to the BIOS features, the gallery below presents some screenshots of Intel's VisualBIOS for the NUC6i7KYK.

The important default setting to note is that the performance mode is set to 'Balanced Enabled'. Other options include 'Low Power Enabled' and 'Max Performance Enabled'. The user interface as well as other settings are quite similar to what we saw in the Skylake NUC review, except that the Skull Canyon BIOS has settings specific to the second M.2 slot and the Thunderbolt port.

In the table below, we have an overview of the various systems that we are comparing the Intel NUC6i7KYK (Skull Canyon) against. Note that they may not belong to the same market segment. The relevant configuration details of the machines are provided so that readers have an understanding of why some benchmark numbers are skewed for or against the Intel NUC6i7KYK (Skull Canyon) when we come to those sections.

Comparative PC Configurations
Aspect Intel NUC6i7KYK (Skull Canyon)
CPU Intel Core i7-6770HQ Intel Core i7-6770HQ
GPU Intel Iris Pro Graphics 580 Intel Iris Pro Graphics 580
RAM Micron 16ATF1G64HZ-2G1A2 DDR4
15-15-15-36 @ 2133 MHz
2x8 GB
Micron 16ATF1G64HZ-2G1A2 DDR4
15-15-15-36 @ 2133 MHz
2x8 GB
Storage Samsung SSD 950 PRO
(512 GB; M.2 Type 2280 PCIe 3.0 x4 NVMe; 40nm; MLC V-NAND)
Samsung SSD 950 PRO
(512 GB; M.2 Type 2280 PCIe 3.0 x4 NVMe; 40nm; MLC V-NAND)
Wi-Fi Intel Dual Band Wireless-AC 8260
(2x2 802.11ac - 866 Mbps)
Intel Dual Band Wireless-AC 8260
(2x2 802.11ac - 866 Mbps)
Price (in USD, when built) $1027 $1027
Performance Metrics - I
POST A COMMENT

133 Comments

View All Comments

  • fanofanand - Monday, May 23, 2016 - link

    So in other words, another 20 mm gives the customer a 50% haircut on price. Yup, more evidence this is a product in search of high margins and little else. Reply
  • jwcalla - Monday, May 23, 2016 - link

    You have to understand that Intel thinks its customers turn on their faucets and liquid gold comes pouring out. Reply
  • Shadowmaster625 - Monday, May 23, 2016 - link

    So its not even as fast as an ancient R9 270M despite being two nodes ahead.... and the power advantage is only 30%. Intel has a problem it seems. Reply
  • ganeshts - Monday, May 23, 2016 - link

    Did you consider the power budget? Reply
  • extide - Monday, May 23, 2016 - link

    Are you kidding? That is actually a pretty damn good achievement, I mean that uses a Cape Verde ASIC, and has about 1TFLOP of compute power, (640 shaders @ ~750 Mhz)

    The Iris Pro 580 has 576 FP32 cores (72 EU * 8) and runs about 1Ghz, so has a bit over 1.1TFLOP compute -- so really pretty similar in terms of compute horsepower. It seems like it is performing right where it should based on it's hardware config.
    Reply
  • fanofanand - Monday, May 23, 2016 - link

    Well, looks like I will be waiting yet another generation. Still can't game on 1080p. I like the storage and Wi-Fi numbers, and I can picture this doing fairly well in some office environments, but are there that many people who are building home PC's (user still has to add RAM etc.) and who will pay that kind of a premium for a device that is somewhat limited in it's use case? I can't speak for anyone else of course, but there is no way my employer would fork out $1k for this, not when they can spend $400 on a cheap business laptop that takes up a similar amount of space in the office but also offers them the ability to extract additional work from me over the weekend. I love the idea, I just don't think the hardware is there yet. Reply
  • Taracta - Monday, May 23, 2016 - link

    How is Alpine Ridge going to get USB 3.1 if it is not off the PCH? Reply
  • ganeshts - Monday, May 23, 2016 - link

    Alpine Ridge has a USB 3.1 host controller integrated along with the Thunderbolt controller. Please look into our Thunderbolt 3 hands-on coverage here: http://www.anandtech.com/show/10248/thunderbolt-3-... : Note the presence of the xHCI controller in the Alpine Ridge block diagram towards the middle of the linked page. Reply
  • tipoo - Monday, May 23, 2016 - link

    This makes me wish Intel offered GT4e with a cheaper dual, then it could compete with boxes like the Alienware Alpha on price/value. Reply
  • tipoo - Monday, May 23, 2016 - link

    Does this support free sync? Reply

Log in

Don't have an account? Sign up now