Unboxing and Visual Inspection

Purchasing a boxed system from a builder like iBuyPower the device arrives at users houses fully assembled and ready to go. The only setup needed are plugging in the mouse and keyboard, internet, video cable, and power cable. Once plugged in it should be as simple as hitting the power button, walking through Windows configuration, and voilà its ready to install the games one wishes to play. 

The iBuyPower PC arrived in a large box as seen above. The box is fairly nondescript outside of the iBuyPower logo and writing on four of the six sides. It is shipped in a box in a box manner to keep what is inside protected. 

When opening up the box we are greeted with our first glimpse of the system in the form of an image on another box. This is more of what one would see on shelves with the system sitting securely inside. The PC sits in styrofoam shell protecting the PC inside. 

After we removed the PC from its box, we are left with what is pictured above. iBuyPower uses form-fitting materials inside to hold all the components in place while in transit. The tempered glass panels each have a protective film over it to prevent any damage to the glass itself. 

Overall the system is packaged well and should handle the bumps and bruises of shipping with how the unit is enclosed. It has both box in box protection and sits suspended from the box panels and edges so it should arrive at the buyer's house as pristine as it left the factory. 

iBuyPower Element i7 8086K

We'll first display some stock images and then poke around on the inside. The case used in the Element chassis uses two tempered glass panels with one on the front with their logo lit up, and one on the sides showing off the internals. Overall it's a good looking case without some of the curious angles we have seen in some designs. The simple design and use of tempered glass panels gives the case a more expensive appearance as opposed to acrylic sided cases. The bare chassis structure is sourced from NZXT while glass front and sides are custom pieces tooled in-house. 


iBuyPower ships the case with 3 ARC RGB LED fans giving it a nice red glow out of the box. Internally, the ASUS TUF Z370-Pro Gaming motherboard and the ADATA Spectrix D41 RAM further illuminates the interior of the case, with the latter two customizable through the Aura Sync software. In regards to airflow, there is plenty of space on the top and bottom of the front panel to let cool air through a removable dust filter. The IO panel sits up at the top of the case for easy access and there is another fan location for additional airflow as well. 

Taking the glass side panel off via four thumbscrews expose a fairly roomy interior with all the components housed inside. Our initial look shows the case will fit up to ATX sized motherboards and we can see a large shroud over the power supply to cover up unsightly cables. To the right of the motherboard and video card, we can see additional shrouds for cleaning up the cables mounted to the chassis as well as two 120mm fans for intake. 

Twisting the case a bit to expose more of the front fans, we can see there is room for two 120mm fans as well as being able to support two 140mm fans or 2x120/2x140mm radiators. Between the front glass panel and the fans is a removable dust filter to help keep the inside of the case clean. Up top, there is room for a 120mm/140mm fan. Below the front fan mount locations we see the louvered top of the power supply shroud, and beneath that the 3.5-inch Western Digital Caviar Blue HDD this model came equipped with. Further below that is another 3.5-inch drive bay. 

Sliding the case around again we are able to see a better shot of the rear 120mm fan mount which in this case has a Corsair H60 CLC unit mounted to cool the CPU. Shown in the top of this image are two of the four studs with rubber washers for attaching the tempered glass main panel. 

This image more clearly shows the shroud covering up the power supply and most of its cables as well as the two 2.5-inch mount points on the left which are removable via thumbscrews. The shroud has cutouts for cables that attach to the bottom of the motherboard as well as a cutout to route PCIe power cables as well making the interior case aesthetic clean with plenty of places to hide and route the wires. 

The back of the case has ample room for cables under the shroud as well as between the side panel and motherboard tray. There are multiple tie-down points for any other cables that also helps routing and cleaning up a jumble of wires. Routing the wires properly behind the tray can prevent side panel bulge we have seen on some other cases. There is a decent size trapazoid cutout exposing the back of the motherboard socket area for ease of mounting coolers. 

The back of the case shows the vented Thermaltake power supply at the bottom and just above that, seven expansions slots for additional PCIe cards are available. 

Flipping the case on its head, we are now able to see another removable dust filter, this time for the bottom mounted power supply. The white strips seen running along the length of the chassis are integrated RGB LED strips. The case stands on four feet raised up a bit over an inch from the bottom of the case which should allow for ample airflow (except perhaps on the most shag of carpets).

Last but certainly not least is the IO panel located on the top front part of the case. The panel consists of a power/reset button, two USB 3.0 ports, 3.5mm headphone and microphone jacks, as well as a HDD LED to display drive activity. I would like to have seen a USB 3.1 port of some sort here. The large gap in front of the IO area is where the air is able to come into the case and from the top is where one removes the front dust filter. There is a matching gap at the front bottom of the case for intake as well. 

Overall, the chassis is well put together feeling sturdy even without the glass and other side panel removed. The tempered glass side and front panels have a black border on edges cleaning up the look so only the internals are exposed and not the frame of the chassis. There is plenty of room to route cables and shrouds to hide them, and iBuyPower did a pretty good job of tidying them up at the factory. iBuyPower's red LED implementation on the included fans and the strips on the bottom of the case cannot be changed, however, the LEDs on the ASUS TUF Z370-Plus Gaming motherboard as well as the ADATA RAM can be controlled through the ASUS AURA software. The case has ample airflow capabilities and can handle the heat without issue. 

In the Box

Inside the iBuyPower Box was a frosted bag which contained all the included accessories. We see an ASUS TUF Z370-Plus Gaming user guide, driver disk, some screws and zip ties. There isn't too much here, but in buying a complete system like this, there isn't much one needs to get started or extra. That said, I would like to have seen an extra SATA cable or two included to more quickly add SATA based storage.

iBUYPOWER Element Overview BIOS and Software
Comments Locked


View All Comments

  • casteve - Sunday, July 8, 2018 - link

    Thanks for the article.

    The DPC latency result, while great, is way lower than previous Coffee Lake results
    which also don't map into the 101us number in this article's table....
  • Joe Shields - Monday, July 9, 2018 - link

    The 101 value, and that 'i7-8700K system' is based off results from a yet to be published motherboard review of the Z370 Taichi.
  • casteve - Monday, July 9, 2018 - link

    Cool beans. The Taichi seems to be a decent board. I look forward to the review....and it would be great if you have the chance to delve into the whys and hows on DPC Latency for the two most recent reviews jumping into the awesome range from the last year's worth of mediocre results.

    Until now I had lumped the 3xx series chipsets into the 'every few years Intel drops the ball on DPC latency" bucket.
  • Joe Shields - Tuesday, July 10, 2018 - link

    The changes we've seen in DPC latency on this platform have come after we started testing with Spectre/Meltdown patches installed and active as well as an OS update.

    I need to eventually go back and test other boards to confirm, but outside of the board(s), no other changes were made outside of what i mentioned above.
  • casteve - Tuesday, July 10, 2018 - link

  • Arbie - Sunday, July 8, 2018 - link

    I think it's valuable to look at pre-built offerings occasionally. Even somepne who can build may not have the time or inclination.

    I agree that in this case the front page photos were confusing. I kept reading the results wondering where the dual-GPU came in.
  • Vanguarde - Sunday, July 8, 2018 - link

    What a joke of a system. They used the bottom tier Asus “Tuf” line which used to be good, but now is crap.
    I only purchase Falcon Northwest computers. Period. No other company does it as well as they do. Period.
  • catavalon21 - Sunday, July 8, 2018 - link

    "...it was already at the limits so a warmer than average room (my office is kept at ~22C) it may be a tipping point."

    In much of the US, 22C / 71.6F is not warmer than average for an office or for a home computing environment.

    I guess your point is that for most of us, system temps would be an issue?
  • Joe Shields - Monday, July 9, 2018 - link

    What was said there is an average room is around 22C/~72F. If it is any warmer, that could tip things. But it depends on the CPU sample, cooler chosen etc. Overclocking a i7-8700K to 5 GHz all cores without an AVX offset isn't really a task for most 120mm radiators.
  • catavalon21 - Monday, July 9, 2018 - link

    Thanks. It was late...

Log in

Don't have an account? Sign up now