NVIDIA Reveals Next-Gen Turing GPU Architecture: NVIDIA Doubles-Down on Ray Tracing, GDDR6, & Moreby Ryan Smith on August 13, 2018 8:20 PM EST
- Posted in
- Quadro RTX
Moments ago at NVIDIA’s SIGGRAPH 2018 keynote presentation, company CEO Jensen Huang formally unveiled the company’s much awaited (and much rumored) Turing GPU architecture. The next generation of NVIDIA’s GPU designs, Turing will be incorporating a number of new features and is rolling out this year. While the focus of today’s announcements is on the professional visualization (ProViz) side of matters, we expect to see this used in other upcoming NVIDIA products as well. And by the same token, today’s reveal should not be considered an exhaustive listing of all of Turing’s features.
Hybrid Rendering & Neural Networking: RT & Tensor Cores
So what does Turing bring to the table? The marquee feature, at least for NVIDIA’s ProViz crowd, is on hybrid rendering, which combines ray tracing with traditional rasterization to exploit the strengths of both technologies. This announcement is essentially a continuation of NVIDIA’s RTX announcement from earlier this year, so if you thought that announcement was a little sparse, well then here is the rest of the story.
The big change here is that NVIDIA is going to be including even more ray tracing hardware with Turing in order to offer faster and more efficient hardware ray tracing acceleration. New to the Turing architecture is what NVIDIA is calling an RT core, the underpinnings of which we aren’t fully informed on at this time, but serve as dedicated ray tracing processors. These processor blocks accelerate both ray-triangle intersection checks and bounding volume hierarchy (BVH) manipulation, the latter being a very popular data structure for storing objects for ray tracing.
NVIDIA is stating that the fastest Turing parts can cast 10 Billion (Giga) rays per second, which compared to the unaccelerated Pascal is a 25x improvement in ray tracing performance.
The Turing architecture also carries over the tensor cores from Volta, and indeed these have even been enhanced over Volta. The tensor cores are an important aspect of multiple NVIDIA initiatives. Along with speeding up ray tracing itself, NVIDIA’s other tool in their bag of tricks is to reduce the amount of rays required in a scene by using AI denoising to clean up an image, which is something the tensor cores excel at. Of course that’s not the only feature tensor cores are for – NVIDIA’s entire AI/neural networking empire is all but built on them – so while not a primary focus for the SIGGRAPH crowd, this also confirms that NVIDIA’s most powerful neural networking hardware will be coming to a wider range of GPUs.
New to Turing is support for a wider range of precisions, and as such the potential for significant speedups in workloads that don't require high precisions. On top of Volta's FP16 precision mode, Turing's tensor cores also support INT8 and even INT4 precisions. These are 2x and 4x faster than FP16 respectively, and while NVIDIA's presentation doesn't dive too deep here, I would imagine they're doing something similar to the data packing they use for low-precision operations on the CUDA cores. And without going too deep ourselves here, while reducing the precision of a neural network has diminishing returns – by INT4 we're down to a total of just 16(!) values – there are certain models that really can get away with this very low level of precision. And as a result the lower precision modes, while not always useful, will undoubtedly make some users quite happy at the throughput, especially in inferencing tasks.
Getting back to hybrid rendering in general though, it’s interesting that despite these individual speed-ups, NVIDIA’s overall performance promises aren’t quite as extreme. All told, the company is promising a 6x performance boost versus Pascal, and this doesn’t specify against which parts. Time will tell if even this is a realistic assessment, as even with the RT cores, ray tracing in general is still quite the resource hog.
Meanwhile, to better take advantage of the tensor cores outside of ray tracing and specialty deep learning software, NVIDIA will be rolling out a SDK, NVIDIA NGX, to integrate neural networking into image processing. Details here are sparse, but NVIDIA is envisioning using neural networking and the tensor cores for additional image and video processing, including methods like the upcoming Deep Learning Anti-Aliasing (DLAA).
Turing SM: Dedicated INT Cores, Unified Cache, Variable Rate Shading
Alongside the dedicated RT and tensor cores, the Turing architecture Streaming Multiprocessor (SM) itself is also learning some new tricks. In particular here, it’s inheriting one of Volta’s more novel changes, which saw the Integer cores separated out into their own blocks, as opposed to being a facet of the Floating Point CUDA cores. The advantage here – at least as much as we saw in Volta – is that it speeds up address generation and Fused Multiply Add (FMA) performance, though as with a lot of aspects of Turing, there’s likely more to it (and what it can be used for) than we’re seeing today.
Speaking of ALUs, one thing I'm still waiting to get confirmation on for Turing – but is something it almost certainly supports – is support for faster low precision operations (e.g. fast FP16). In Volta this is manifested as FP16 operations at 2x the FP32 rate and INT8 operations at 4x the INT32 rate, and I expect much the same here. Especially as the tensor cores already support this concept, so it would be highly unusual not to bring it to the CUDA cores as well.
Fast FP16, rapid packed math, and other means of packing together multiple smaller operations into a single larger operation, are all a key component of improving GPU performance at a time when Moore’s Law is slowing down. By only using data types as large (precise) as necessary, it’s possible to pack them together to get more work done in the same period of time. This in turn is particularly important to neural networking inference but is also increasingly important in game development, as not all shader programs require FP32 precision, and cutting down on precision can improve performance and cut down on precious memory bandwidth & register file usage.
The Turing SM also includes what NVIDIA is calling a “unified cache architecture.” As I’m still awaiting official SM diagrams from NVIDIA, it’s not clear if this is the same kind of unification we saw with Volta – where the L1 cache was merged with shared memory – or if NVIDIA has gone one step further. At any rate NVIDIA is saying that it offers twice the bandwidth of the “previous generation” which is unclear if NVIDIA means Pascal or Volta (with the latter being more likely).
Finally, also tucked away in the Turing press release is the mention of support for variable rate shading. This is a relatively young and upcoming graphics rendering technique that there's limited information about (especially as to how exactly NVIDIA is implementing it). But at a very high level it sounds like the next generation of NVIDIA's multi-res shading technology, which allows developers to render different areas of a screen at various effective resolutions, in order to concentrate quality (and rendering time) in to the areas where it's the most beneficial.
Feeding the Beast: GDDR6 Support
As the memory used by GPUs is developed by outside companies, there are no big secrets here. The JEDEC and its big 3 members Samsung, SK Hynix, and Micron, have all been developing GDDR6 memory as the successor to both GDDR5 and GDDR5X, and NVIDIA ha confirmed that Turing will support it. Depending on the manufacturer, first-generation GDDR6 is generally promoted as offering up to 16Gbps per pin of memory bandwidth, which is 2x that of NVIDIA’s late-generation GDDR5 cards, and 40% faster than NVIDIA’s most recent GDDR5X cards.
|GPU Memory Math: GDDR6 vs. HBM2 vs. GDDR5X|
|NVIDIA Quadro RTX 8000
|NVIDIA Quadro RTX 5000
|NVIDIA Titan V
|NVIDIA Titan Xp
||NVIDIA GeForce GTX 1080 Ti||NVIDIA GeForce GTX 1080|
|Total Capacity||24 GB||16 GB||12 GB||12 GB||11 GB||8 GB|
|B/W Per Pin||14 Gb/s||1.7 Gb/s||11.4 Gbps||11 Gbps|
|Chip capacity||2 GB (16 Gb)||4 GB (32 Gb)||1 GB (8 Gb)|
|B/W Per Chip/Stack||56 GB/s||217.6 GB/s||45.6 GB/s||44 GB/s|
|Total B/W||672 GB/s||448GB/s||652.8 GB/s||547.7 GB/s||484 GB/s||352 GB/s|
|DRAM Voltage||1.35 V||1.2 V (?)||1.35 V|
Relative to GDDR5X, GDDR6 is not quite as big of a step up as some past memory generations, as many of GDDR6’s innovations were already baked into GDDR5X. None the less, alongside HBM2 for very high end use cases, it is expected to become the backbone memory of the GPU industry. The principle changes here include lower operating voltages (1.35v), and internally the memory is now divided into two memory channels per chip. For a standard 32-bit wide chip then, this means a pair of 16-bit memory channels, for a total of 16 such channels on a 256-bit card. While this in turn means there is a very large number of channels, GPUs are also well-positioned to take advantage of it since they are massively parallel devices to begin with.
NVIDIA for their part has confirmed that the first Turing Quadro cards will run their GDDR6 at 14Gbps, which happens to be the fastest speed grade offered by all of the Big 3 members. That said, NVIDIA has also confirmed that they will be using Samsung’s memory here, specifically for their cutting-edge 16Gb capacity modules. This is important, as it means for a typical 256-bit GPU, NVIDIA could outfit the card with the standard 8 modules and get 16GB of total capacity, or even 32GB if they use clamshell mode.
Odds & Ends: NVLink, VirtualLink, & 8K HEVC
Rounding out the Turing package thus far, NVIDIA has also briefly confirmed some of the external I/O features that the architecture will support. NVLink support will be present on at least some Turing products, and NVIDIA is tapping it for all three of their new Quadro cards. In the case of all of these products, NVIDIA is offering two-way GPU configurations. I am assuming based on this that we are looking at two NVLinks per board – similar to the Quadro GV100 – however I’m waiting on confirmation of that given NVIDIA’s 100GB/sec transfer number.
One thing I’d like to note here before any of our more gaming-focused audience reads too much into this is that the presence of NVLink in Turing hardware doesn’t mean it’ll be used in consumer parts. Today’s event is all about ProViz, and it would be an entirely NVIDIA thing to do to limit that feature to Quadro and Tesla only. So we’ll see what happens once NVIDIA announces their obligatory consumer cards.
|USB Type-C Alternate Modes|
|Video Bandwidth (Raw)||32.4Gbps||32.4Gbps||16.2Gbps||N/A|
|USB 3.x Data Bandwidth||10Gbps||N/A||10Gbps||10Gbps + 10Gbps|
|High Speed Lane Pairs||6||4|
|Max Power||Mandatory: 15W
|Optional: Up To 100W|
Meanwhile gamers and ProViz users alike have something to look forward to for VR, with the addition of VirtualLink support. The USB Type-C alternate mode was announced last month, and supports 15W+ of power, 10Gbps of USB 3.1 Gen 2 data, and 4 lanes of DisplayPort HBR3 video all over a single cable. In other words, it’s a DisplayPort 1.4 connection with extra data and power that is intended to allow a video card to directly drive a VR headset. The standard is backed by NVIDIA, AMD, Oculus, Valve, and Microsoft, so Turing products will be the first of what we expect will ultimately be a number of products supporting the standard.
Finally, while NVIDIA only briefly touched upon the subject, we do know that their video encoder block, NVENC, has been updated for Turing. The latest iteration of NVENC specifically adds support for 8K HEVC encoding. Meanwhile NVIDIA has also been able to further tune the quality of their encoder, allowing them to achieve similar quality as before with a 25% lower video bitrate.
Along with the hardware specifications announced thus far, NVIDIA has also thrown out a handful of performance numbers for Turing hardware. It should be noted that there is a lot more we don’t know here than we do. However at a high level, these appear to be based around a mostly or completely enabled high-end Turing SKU featuring 4608 CUDA cores and 576 tensor cores. Clockspeeds are not disclosed, however as these numbers are profiled against Quadro hardware, we’re likely looking at lower clockspeeds than what we’ll see in any consumer hardware.
|NVIDIA Quadro Specification Comparison|
|Memory Clock||14Gbps GDDR6||1.7Gbps HBM2||9Gbps GDDR5X||6.6Gbps GDDR5|
|Memory Bus Width||384-bit||4096-bit||384-bit||384-bit|
|Half Precision||32 TFLOPs?||29.6 TFLOPs?||N/A||N/A|
|Single Precision||16 TFLOPs||14.8 TFLOPs||12 TFLOPs||7 TFLOPs|
|Double Precision||?||7.4 TFLOPs||0.38 TFLOPs||0.22 TFLOPs|
|Tensor Performance||500 TOPs
|Manufacturing Process||TSMC 12nm FFN?||TSMC 12nm FFN||TSMC 16nm||TSMC 28nm|
|Launch Date||Q4 2018||March 2018||October 2016||March 2016|
Along with the aforementioned 10GigaRays/sec number for the RT cores, for the tensor cores NVIDIA is touting 500 trillion tensor operations per second (500T TOPs). For reference, NVIDIA frequently quotes the GV100 GPU as maxing out at 120T TOPs, however these are not the same. Specifically, while the GV100 was quoted with FP16 operations, Turing is being quoted with extremely low precision INT4, which just so happens to be one-quarter the size of FP16, and thus 4x the throughput. If we do normalize for precision, then Turing's tensor cores don't appear to have better throughput per core, but rather they offer more precision options than Volta did. At any rate, with 576 tensor cores in this chip is quite close to the 640 offered by GV100, but at the end of the day is still a lower amount.
As for the CUDA cores, NVIDIA is saying that the Turing GPU can offer 16 TFLOPS of performance. This is slightly ahead of the 15 TFLOPS single precision performance of the Tesla V100, or even a bit farther ahead of the 13.8 TFLOPS of the Titan V. Or if you’re looking for a more consumer-focused reference, it’s about 32% more than the Titan Xp. Some quick paper napkin math with these figures would put the GPU clockspeed at around 1730MHz, assuming there have been no other changes at the SM level which would throw off the traditional ALU throughput formulas.
Meanwhile NVIDIA has stated that the Quadro cards will come with GDDR6 running at 14Gbps. And with the top two Quadro SKUs offering 48GB and 24GB of GDDR6 respectively, we are almost looking at a 384-bit memory bus for this Turing GPU. By the numbers, this adds up to 672 GB/sec of memory bandwidth for both of the top two Quadro cards.
Otherwise with the architectural shift, it’s difficult to make too many useful performance comparisons, especially against Pascal. From what we’ve seen with Volta, NVIDIA’s overall efficiency has gone up, especially in well-crafted compute workloads. So the roughly 33% improvement in on-paper compute throughput versus the Quadro P6000 may very well be underestimating things. As for consumer product speculation, I’ll hold off on that entirely.
I'll also quickly touch upon the die size of this new GPU. At 754mm2 it's not just large, but it's huge. Compared to other GPUs it's second in size only to NVIDIA's GV100, which for now at least remains the NVIDIA flagship in certain respects. And with 18.6 billion transistors, it's easy to see why the resulting chip needed to be so big. Pardon the pun, but it's clear that NVIDIA has some very big plans for this GPU, and enough so that they can justify having two GPUs in their product stack that are so enormously large.
NVIDIA for their part hasn't stated the specific model number of this GPU – if it's the traditional 102-class GPU, or even the 100-class GPU. The sheer size of the GPU has me leaning towards the latter, but the matter is somewhat arbitrary at this point since the only thing even remotely comparable is GV100. Either way, it does have me wondering whether we're going to see this GPU filter down to consumer products in some form; it's so large that NVIDIA may intend to keep it for their more profitable Quadro and Tesla GPUs. In which case this specific GPU won't be what eventually hits consumer cards.
Coming in Q4 2018, If Not Sooner
Wrapping things up, alongside the Turing architecture announcement, NVIDIA has announced that the first 3 Quadro cards based on Turing GPUs – the Quadro RTX 8000, RTX 6000, and RTX 5000 – will be shipping in Q4 of this year. As the very nature of this reveal is somewhat inverted – normally NVIDIA announces consumer parts first – I wouldn’t necessarily apply that same timeline to consumer cards, which don’t have as stringent the validation requirements. Still, this means we’ll see Turing hardware in Q4 of this year, if not sooner. Interested Quadro buyers will want to start saving their pennies now: a top-tier Quadro RTX 8000 will set you back a cool $10,000.
Finally, as for NVIDIA’s Tesla customers, the Turing launch leaves Volta in a state of flux. NVIDIA has not told us whether Turing will eventually expand into the high-end Tesla space – replacing the GV100 – or if their one-off Volta part will remain the master of its domain for a generation. However as the other Tesla cards have been Pascal-powered thus far, they are very clear candidates for a Turing treatment in 2019.
Post Your CommentPlease log in or sign up to comment.
View All Comments
grizzle - Monday, August 13, 2018 - linkYou might want to confirm the definition of "variable rate shading" because I don't think it has to do with faster throughput using lower precision data types. Microsoft has a patent for it: http://www.freepatentsonline.com/y2018/0047203.htm...
It sounds like it lets you render to a render target at different granularities (e.g. maybe per-pixel for some parts, per-sample for others and in 2x2 pixel granularities for others) in a single draw call. Lets you reduce pixel costs for lower frequency/less important parts of the output image (like the edges of the screen or for foveated rendering for VR)
Ryan Smith - Tuesday, August 14, 2018 - linkThanks! Now that I've had a bit more time to sit down and do some research, I've updated the article accordingly.
repoman27 - Monday, August 13, 2018 - linkHey Ryan, I see 8K DisplayPort listed as a feature on one of those slides. I'm guessing that means Turing is the first GPU to support DSC then?
Ryan Smith - Tuesday, August 14, 2018 - linkUnfortunately I don't have any information on that.
DigitalFreak - Tuesday, August 14, 2018 - linkPascal supported DP 1.4, which includes DSC.
repoman27 - Tuesday, August 14, 2018 - linkDisplay Stream Compression is an optional feature of the DisplayPort 1.4 spec, not a normative requirement, and support likely requires the addition of fixed function blocks to the display controller.
AFAIK, none of the current GPU architectures from either NVIDIA or AMD support DSC. Everyone assumes that they do because the outputs are listed as DP 1.4 in the spec sheets. However, 8K at 60 Hz is only supported for dual-cable displays, and I can find zero documentation to suggest that any of these GPUs are DSC capable.
mode_13h - Tuesday, August 14, 2018 - linkI want that die shot on a carpet.
Spunjji - Tuesday, August 14, 2018 - link2nd this
mode_13h - Tuesday, August 14, 2018 - link> I am assuming based on this that we are looking at two NVLinks per board – similar to the Quadro GV100 – however I’m waiting on confirmation of that given NVIDIA’s 100GB/sec transfer number.
Yes, it must be 2. NVLink is bidir, and Nvidia always quotes the bidir numbers. NVLink 2.0 is good for 25 GB/sec per link per direction. So, there's your 100 GB/sec.
AMD could accomplish the same throughput with roughly x25 lanes of PCIe 4.0 connectivity between a pair of Vega 20 dies. Of course, it's a bit silly to even mention AMD, given how far Turing outclasses even Vega 20.
mode_13h - Tuesday, August 14, 2018 - link> NVIDIA is touting 500 trillion tensor operations per second (500T TOPs).
No, just 500 trillion ops per second.
> it's so large that NVIDIA may intend to keep it for their more profitable Quadro and Tesla GPUs. In which case this specific GPU won't be what eventually hits consumer cards.
I foresee them holding back the tensor and RT cores, or at least drastically reducing their numbers. I think tensor cores, at least, are part of their market segmentation strategy, in order to keep people from using GTX models for serious deep learning or inferencing. Perhaps they have a similar strategy with reserving the full RT core-count for their Quadro GPUs.
Also, why no Quadro GP100 in the comparison table? That would be more interesting than M6000.