Memory Frequency Scaling in SFF Systems: An Investigation with SO-DIMMs and Coffee Lakeby Ganesh T S on November 28, 2018 8:00 AM EST
DRAM Options for the ASRock DeskMini GTX (Z370)
There are a number of DDR4 SO-DIMM kits compatible with the ASRock DeskMini GTX. In addition to the frequency, the timing parameters / latency numbers also influence the performance. For our evaluation today, we are going to look at four different options with three different kits:
- Kingston HyperX Impact DDR4 SO-DIMM 2x8GB @ 3066 MT/s, 20-22-22-42
- Kingston HyperX Impact DDR4 SO-DIMM 2x8GB @ 2933 MT/s, 17-19-19-39
- Team Group T-Force Vulcan DDR4 SO-DIMM 2x8GB @ 2666 MT/s, 18-18-18-38
- Team Group T-Force Vulcan DDR4 SO-DIMM 2x8GB @ 2400 MT/s, 15-17-17-35
Out of these configurations, the HyperX Impact ones were both from the same kit rated for operation at up to 3200 MT/s. Unfortunately, the ASRock DeskMini GTX refused to boot at 3200 MT/s. However, setting that XMP profile and manually tweaking the frequency to 3066 MT/s enabled the system to operate normally. The two T-Force Vulcan configurations were enabled using distinct kits.
Kingston HyperX Impact [ 2933 MT/s, 17-19-19-39 ] [ 3066 MT/s, 20-22-22-42 ]
The Kingston HyperX Impact HX432S20IB2K2/16 SO-DIMM kit used in our review supports two XMP profiles - one at 2933 MT/s with a 17-19-19-39 timing, and another at 3200 MT/s with a 20-22-22-42 timing. While the former profile was a one-click process in the BIOS to activate, the latter caused some issues and had to be run at 3066 MT/s. We could have spent more time optimizing the latency numbers for the 3066 MT/s operating point. However, keeping in mind the number of benchmarks to process, we decided to make do with minimal changes to the BIOS after the XMP activation.
AIDA64 includes a quick memory benchmark that provides some basic bandwidth and latency numbers to ensure that the kits are operating as expected.
At 3066 MT/s, the RAM-to-RAM copy (representative of both read and write speeds) comes in at 36924 MBps, and an average latency of 54.6 ns.
The relevant BIOS screenshot for the 2933 MT/s configuration are provided below.
The AIDA64 benchmark for the 2933 MT/s configuration shows lower read and write bandwidth numbers compared to the 3066 MT/s configuration. However, the copy benchmark comes in a tad higher at 37685 MBps, and this is in part due to the 51.6 ns latency metric (compared to 54.6 ns for the DDR4-3066 configuration).
The kit is currently being sold for $168.
Team Group T-Force Vulcan [ 2666 MT/s, 18-18-18-38 ]
The Team Group T-Force Vulcan TLRD416G2666HC18FDC-S01 SO-DIMM kit supports one XMP profile at 2666 MT/s with a 18-18-18-38 timing.
The AIDA64 Cache and Memory Benchmark numbers are presented below. The RAM performance in terms of bandwidth is a bit lower than the DDR4-3066 and DDR4-2933, as expected. The tighter timing numbers (in terms of clock cycles) are unfortunately not able to make up for the loss from the frequency component, and the latency ends up being slightly worse at 55.7 ns.
The 8GB member of the kit is currently being sold for $65. The kit itself doesn't seem to be available for a reasonable price at any e-tailer in the US, but, it is fine to buy a couple of the 8GB modules for use in a system. In our pricing table, we have assumed that this kit costs $130.
Team Group T-Force Vulcan [ 2400 MT/s, 15-17-17-35 ]
The Team Group T-Force Vulcan TLRD416G2400HC15BDC-S01 SO-DIMM kit works out of the box at 2400 MT/s with a 15-17-17-35 timing. It supports a single XMP profile. With all Coffee Lake systems supporting DDR4-2400 at the minimum, it doesn't need to. However, the XMP support is useful for older platforms.
The AIDA64 Cache and Memory Benchmark numbers are presented below. As expected, this base frequency configuration comes in with the lowest bandwidth numbers and highest latency among all the tested configurations.
The 4GB single SO-DIMM version in this family is currently being sold for $37. No current listing for the 8GB kit could be found. In our pricing table, we have assumed that the kit being evaluated at 2400 MT/s costs $130, though it has got to be lower than the 2666 MT/s kit in retail pricing (as it is the set with the lower performance in the T-Force Vulcan DDR SO-DIMM product line).
A note about the performance numbers from the artificial AIDA64 memory benchmark - the bandwidth numbers are as expected, varying from 35043 MBps for the DDR4-2400 kit to 43377 MBps for the DDR4-3066 kit. The latency numbers have a surprise, though - the best seems to be 51.6 ns for the DDR-2933 kit. In the rest of this review, we will see how these numbers influence day-to-day usage and computing workloads using both artificial and real-world benchmarks.
Post Your CommentPlease log in or sign up to comment.
View All Comments
cyberguyz - Wednesday, November 28, 2018 - linkTo me watching SFF overclocking and benchies is kinda like watching midget wrestling matches. Always worth a giggle.
CheapSushi - Wednesday, November 28, 2018 - linkOdd analogy but okay.
PeachNCream - Thursday, November 29, 2018 - linkI think its less cringe-worthy than reading another tone-deaf article about the old fat guy wrestling equivalent in the form of obsolete full or micro ATX systems when we live in a world where a lot of people don't even own a PC because their phone has replaced it.
Zan Lynx - Wednesday, December 5, 2018 - linkNo one cares about custom DIMM timings on anything but full-size tower PCs. People who don't own a PC tower don't have any reasonable options to customize anything.
I recently read a laughable blog post by a guy that did manage to upgrade the CPU in his laptop. Joy! So great, right?
Nah. It just ran hot and he had to limit the clock speed. What an upgrade.
Elm5tbgb - Thursday, November 29, 2018 - linkPlease benchmark graphics performance whenever you test sff systems. No, the the dedicated GPU, the igp. This is the most relevant test consumers will consider whenever we buy laptops or sff PC's. How much graphics performance can I get from ram upgrades for each tier?
Russo - Monday, December 17, 2018 - linkI have perused your article, it is exceptionally useful and accommodating for me.I appreciate the profitable data you offer in your articles. https://www.alexisdove.com/categories/rings-by-ale...