The be quiet! Pure Power 12 M 650W PSU Review: Solid Gold
by E. Fylladitakis on March 11, 2024 8:00 AM EST- Posted in
- Cases/Cooling/PSUs
- PSUs
- 80Plus Gold
- be quiet!
- ATX v3.0
Power Supply Quality
The electrical performance of the Be quiet! Pure Power 12 M 650W PSU is laudable within its category, offering a competitive edge in its segment. Voltage regulation is impressively tight, with the 12V rail demonstrating around 1% variance, and even better performance observed on the 3.3V and 5V rails, underscoring the PSU's meticulous attention to maintaining stability across all outputs. This precision is particularly notable, considering the tendency of some manufacturers to prioritize the 12V rail over the secondary rails. The ripple suppression is exemplary, with maximum values reaching 32 mV on the 12V line, 20 mV on the 5V line, and 18 mV on the 3.3V line, illustrating the PSU's ability to deliver clean power under varying loads.
Main Output | ||||||||
Load (Watts) | 131.55 W | 327.69 W | 489.18 W | 651.61 W | ||||
Load (Percent) | 20.24% | 50.41% | 75.26% | 100.25% | ||||
Amperes | Volts | Amperes | Volts | Amperes | Volts | Amperes | Volts | |
3.3 V | 1.62 | 3.33 | 4.05 | 3.33 | 6.07 | 3.31 | 8.09 | 3.31 |
5 V | 1.62 | 5.05 | 4.05 | 5.04 | 6.07 | 5.02 | 8.09 | 5.01 |
12 V | 9.71 | 12.15 | 24.28 | 12.1 | 36.43 | 12.04 | 48.57 | 12.03 |
Line | Regulation (20% to 100% load) |
Voltage Ripple (mV) | |||||
20% Load | 50% Load | 75% Load | 100% Load | CL1 12V |
CL2 3.3V + 5V |
||
3.3V | 0.5% | 16 | 12 | 14 | 18 | 12 | 16 |
5V | 0.6% | 18 | 12 | 14 | 20 | 14 | 16 |
12V | 1% | 16 | 20 | 28 | 32 | 30 | 22 |
During our routine evaluation, we examine the fundamental protection features of all power supply units we review, including Over Current Protection (OCP), Over Voltage Protection (OVP), Over Power Protection (OPP), and Short Circuit Protection (SCP). The Be quiet! Pure Power 12 M 650W PSU met all standard protection tests, affirming its capability to respond effectively in situations that could compromise the unit or its connected hardware. It demonstrated sharply tuned Over Current Protection (OCP) for the 3.3V and 5V rails, activating at 114% and 116% of their maximum currents, respectively. The OCP trigger point of the 12V rail is slightly higher, at 122%, but that remains a very sharp figure for an ATX 3.0 PSU. This sensitivity level ensures a reliable safeguard while maintaining a balanced performance across different loads.
Particularly noteworthy is the Over Power Protection (OPP) feature, which allows the PSU to manage output levels up to 112% of its nominal capacity before shutting down. This capacity to handle momentarily higher outputs without immediate shutdown offers a buffer against sudden spikes in demand, though it is designed to operate safely within its rated specifications, thereby ensuring longevity and stability even under considerable stress.
Conclusion
In the landscape of power supply units, the Be quiet! Pure Power 12 M 650W PSU stands out as a noteworthy contender, particularly for those wanting to balance overall performance, quality, and cost. Be quiet!'s approach with the Pure Power 12 M 650W leans towards dependability and time-tested designs, opting for reliability and consistent performance over chancy innovation. This strategy, although it bodes well regarding the PSU's reliability, might pose questions about its edge in a market driven by continuous innovation.
The construction and electrical output of the PSU are commendably solid for a product of this class. HEC/Compucase is the veteran OEM behind this design, a company known for their competence in the mid-range market and possibly the reason behind the lengthy 10-year warranty. Choosing a 120 mm fan for cooling, despite its high quality, hints at a compromise between cost and the potential for superior cooling with a larger fan, with the slightly larger-than-usual heatsinks being the saving grace of this design. Electrical characteristics, including stable voltage regulation and effective ripple control, meet the expectations set by its 80Plus Gold rating without pushing beyond these benchmarks, indicating a product that performs reliably within its design parameters but does not surpass them.
Thermal management and noise performance offer a nuanced picture. The PSU maintains quiet operation under normal use; however, challenges arise with increased load or temperature, where its acoustics performance greatly deteriorates. Nevertheless, its efficiency and electrical integrity are very slightly impacted by the elevated ambient temperatures, which is quite a feat considering the very low ambient temperature operation threshold set by the company. From a technical point of view, the designer opted to lean towards low operating temperatures and ensure the PSU’s long term reliability rather than allow the unit to run quieter but hotter. This design choice is certainly reasonable and yet, at the same time, places a small dent on the Be quiet’s ethos of striving to design the quietest products possible.
The greatest drawback of the Pure Power 12 M 650W PSU is its retail price. At $99, the price tag of the 650W 80Plus Gold unit will raise eyebrows, particularly among budget-conscious builders or those comparing options within a highly competitive market. While the price point is on the higher side for a 650W PSU, it's important to consider the value added by the unit's 10-year warranty and ATX 3.0 compliance/capabilities. These offer peace of mind and a sense of security in the long-term reliability of the product, which can justify the initial investment.
Ultimately, then, the Pure Power 12 M 650W is trying to straddle a very fine line with regards to quality and performance. Paying a premium for a Gold-tier power supply simply isn't going to appeal to most budget-minded builders, but for enthusiasts and professionals who value the combination of balanced performance, modularity, and reliability – underscored by a generous warranty – the investment can be seen as reasonable. The assurance of compatibility with the latest and future hardware further adds to its appeal, suggesting that the Pure Power 12 M 650W PSU is not just a purchase but an investment in a system's long-term viability.
12 Comments
View All Comments
DBissett - Sunday, March 17, 2024 - link
Maybe it doesn't require $100, but I want all the safety I can get in the PSU. I've always bought Corsair but once I had a PSU blowup, like POP, smoke, and everything in the box got fried. I did get my data saved by having a tech guy swap the platter in the HDD to another unit. Anyway, at 10% of the cost of systems I usually build I don't think it's too much for top quality.jrbales@outlook.com - Monday, April 15, 2024 - link
Thirty years ago I took a PC building class. In regards to PSUs, the instructor drilled this into my head: You get what you pay for, and the PSU is the one component you don't want to be purchasing based on getting the cheapest price possible. He stressed the PSU as the most important components in that it affects the stability and longevity of your system and software. Since that time, I've stuck to three brands that I trust based on their reputation and consistency in producing great models: Seasonic, Corsair, and Be Quiet! (your list will vary), and I've only used Seasonic the last 15 years or so. But even then you should still read some reviews before pulling out the credit card so that you're fully informed of the strengths and weaknesses of various models. And I've managed to find online sales that have helped save a few bucks. A quality PSU will last longer than a cheap one with poor design and components that can take your system down (or even set it on fire in the worst case).