Feature Set Comparison

Enterprise hard drives such as the WD Re and WD Se come with features such as real time linear and rotational vibration correction, dual actuators to improve head positional accuracy, multi-axis shock sensors to detect and compensate for shock events and dynamic fly-height technology for increasing data access reliability. For the consumer NAS versions, Western Digital incorporates some features in firmware under the NASWare moniker, while Seagate has NASWorks. We have already covered some of these features in our WD Red review last year. These hard drives also expose some of their interesting firmware aspects through their SATA controller, but, before looking into those, let us compare the specifications of the four drives being considered today.

4 TB NAS Hard Drive Face-Off Contenders
  WD Red Seagate NAS HDD WD Se WD Re
Model Number WD40EFRX ST4000VN000 WD4000F9YZ WD4000FYYZ
Interface SATA 6 Gbps SATA 6 Gbps SATA 6 Gbps SATA 6 Gbps
Advanced Format (AF) Yes Yes Yes No (512N Sector Size)
Rotational Speed IntelliPower (5400 rpm) 5900 rpm 7200 rpm 7200 rpm
Cache 64 MB 64 MB 64 MB 64 MB
Rated Load / Unload Cycles 300K 600K 300K 600K
Non-Recoverable Read Errors / Bits Read 1 per 10E14 1 per 10E14 1 per 10E14 1 per 10E15
MTBF 1M 1M 800K 1.2M
Rated Workload ~120 - 150 TB/yr < 180 TB/yr? 180 TB/yr 550 TB/yr
Operating Temperature Range 0 - 70 C 0 - 70 C 5 - 55 C 5 - 55 C
Acoustics (Seek Average - dBA) 28 25 34 34
Physical Dimensions 4 in. x 5.787 in. x 1.028 in. / 680 grams 4 in. x 5.787 in. x 1.028 in. / 610 grams 4 in. x 5.787 in. x 1.028 in. / 750 grams 4 in. x 5.787 in. x 1.028 in. / 750 grams
Warranty 3 years 3 years 5 years 5 years
Pricing $213 $220 $280 $383

Some of the interesting aspects are highlighted in bold above. The Seagate model enjoys a 500 rpm advantage in rotational speed. So, it shouldn't be a surprise if it comes out in front in some of the benchmarks. It may also mean that the Seagate NAS HDD consumes more power compared to the WD Red. Seagate also rates the number of load / unload cycles at 600K for the NAS HDD (same as the WD Re). The WD Re and WD Se 4 TB versions weigh 750 grams each and they use five 800 GB platters. The WD Red weighs in at 680 g, but the Seagate NAS HDD (with four 1 TB platters) weighs only 610 g and comes in as the lightest of the lot. Considering the data at our disposal, it appears unlikely that the WD Red 4 TB has five platters, but, we have reached out to Western Digital to confirm the platter density in the unit (Update: WD got back to us with confirmation that the WD Red 4 TB version has four 1 TB platters).

A high level overview of the various supported SATA features is provided by HD Tune Pro v5.00.

The WD Red supports interface power management (termed as HIPM or DIPM depending on whether the power management to alter the status of the SATA link is initiated by the device or the host), but not advanced power management (APM), while the Seagate NAS HDD supports APM, but not HIPM / DIPM. APM allows setting of the head parking interval. As we saw in the WD Red 3 TB review, APM support is available only through proprietary commands using the WDIDLE tool. By default, it is disabled, which is fine considering the target market for the drives. The Seagate drive, on the other hand, makes it possible for the NAS OS to set the head parking interval. HIPM / DIPM allows further fine-tuning of power consumption, and it is a pity that the Seagate NAS HDD doesn't support it. In terms of the supported features above, the WD Re and Seagate NAS HDD are the same. The WD Se differs from the WD Re / Seagate NAS HDD in the fact that device configuration overlay (DCO) is not supported. DCO allows for the hard drive to report modified drive parameters to the host. It is not a big concern for most applications.

We get a better idea of the supported features using FinalWire's AIDA64 system report. The table below summarizes the extra information generated by AIDA64 (that is not already provided by HD Tune Pro).

Supported Features
  WD Red Seagate NAS HDD WD Se WD Re
DMA Setup Auto-Activate Supported, Disabled Supported, Disabled Supported, Disabled Supported, Disabled
Extended Power Conditions Not Supported Not Supported Supported, Disabled Supported, Disabled
Free-Fall Control Not Supported Not Supported Not Supported Not Supported
General Purpose Logging Supported Supported Supported Supported
In-Order Data Delivery Not Supported Not Supported Not Supported Not Supported
NCQ Priority Information Supported Not Supported Supported Supported
Phy Event Counters Supported Supported Supported Supported
Release Interrupt Not Supported Not Supported Not Supported Not Supported
Sense Data Reporting Not Supported Not Supported Not Supported Not Supported
Software Settings Preservation Supported, Enabled Supported, Enabled Supported, Enabled Supported, Enabled
Streaming Supported Supported Not Supported Not Supported
Tagged Command Queuing Not Supported Not Supported Not Supported Not Supported

Interesting aspects are highlighted in the above table. The extended power conditions (EPC) supported in the enterprise drives (WD Se / WD Re) allow for more power states than the usual parked head / spun down disks. These may include states where the electronics is switched off, the heads are unloaded, the disks are spinning at a reduced rpm and where the motor is completely stopped (or any valid combination thereof). This provies for more fine-tuned tradeoffs between performance (in terms of latency) and power consumption. NCQ priority information adds priority to data in complex workload environments. While WD seems to have it enabled on all its NAS drives, Seagate seems to believe it is unnecessary in the Seagate NAS HDD's target market. A surprising finding in the above run was the fact that the two enterprise drives from WD don't support the NCQ streaming feature which enables isochronous data transfers for multimedia streams while also improving performance of lower priority transfers. This feature could be very useful for media server and video editing use-cases. Fortunately, both the WD Red and Seagate NAS HDD support this feature.

Introduction Performance - Raw Drives
Comments Locked


View All Comments

  • Wwhat - Tuesday, September 10, 2013 - link

    Doing a 'torture test' means you use them a lot constantly though, not that you put them on a burner to see what happens.
    And frankly a drive should adhere to its stated lifetime/performance somewhat regardless how heavy you use it.
    And don't forget that all drives unless powered down spin constantly anyway.

    And quite a few NAS boxes for the home have so-so cooling, so it would be valid to test how hot HD's get during intensive (but normal) use.
  • chubbypanda - Thursday, September 26, 2013 - link

    Ganesh, rated reliability for WD Se is also 1 per 10E15 (see http://www.wdc.com/wdproducts/library/SpecSheet/EN... ), same as Re.
  • Oller - Friday, October 11, 2013 - link

    I am planning to buy a Drobo 5N as a Plex video server and also for TimeMachine backup. That would seem to require limited data transfer.
    From the review it would seem that the Red is just as good as the RE and at nearly half the price would be the better choice.
    Do you agree that the Red is a better choice than the RE for my needs?
  • chrcoluk - Thursday, November 17, 2016 - link

    Some bait and switching going on.

    I own 4 WD red's all 3TB versions.

    First 2 purchased 2 years ago, they report NCQ supported, 4k sectors, security mode, and have no drive parking.
    Brought 2 more yesterday. Dont support NCQ (wtf?), drive parking same as green drives, one is bigger than the other has a few extra LBA blocks and reports an extra gig size and 512byte sectors instead of 4k.

    Totally bizzare.

Log in

Don't have an account? Sign up now