Dell XPS 15 Haswell Edition: QHD+ with a Refined Design
by Jarred Walton on March 6, 2014 7:00 AM ESTDell XPS 15: QHD+ LCD Testing
Considering that this is the first QHD+ display that I’ve tested in a laptop, I’m going to start our performance metrics there. We’re changing quite a few things with our laptop reviews for 2014 and moving forward, and one of the most important changes will be in the area of testing the displays. We’ll be using the same software and hardware that we use for testing desktop displays, and hopefully the results of our new testing will shake things up a bit in the laptop LCD world. Basically, we’re using CalMAN 5 to perform testing, and that now allows us to report uncalibrated as well as calibrated color results.
Update: After learning of the "Splendid mode" and "Generic color" options in the Windows Mobility Center settings on the XPS 15, I went back and revisited the subject of display accuracy/quality. You can read more in the full XPS 15 LCD update article. Note that most of the results below (other than the comparison charts) are from the initial testing.
The charts and images tell the story quite well, but the short summary is this: out of the box, most Windows laptops – including the new XPS 15 with a QHD+ display – deliver colors that seem to have more in common with fantasy land than they do with accuracy. Post-calibration the display does exceptionally well, but if you lack the proper hardware and software to calibrate your display (or if you’re running an application that bypasses the LCD LUTs), you’ll be stuck with less than ideal color reproduction. How important this is will depend on the individual, but for a top quality display we really want to see manufacturers take the time to do the display justice. $5 extra per system to properly factory calibrate the display would do wonders here – we don’t need perfection out of the box, but average DeltaE of less than 2 would certainly be desirable. And with that said, let’s start with the uncalibrated results.
The RGB values are very clearly nowhere near what they should be, with most blues being 10% too high and the reds being 15% too low. Likewise, the gamma – which should ideally be a flat line – looks more like a mountain and a valley. Grayscale DeltaE is only at acceptable levels for the darkest of shades – where it matters less – while everything above the 15% level ends up with a visible error of 5.5 to nearly 8.0. Colors are a bit better in most respects, with the blues generally being the farthest off of the target, but quite a few colors actually come in below a 3.0 DeltaE.
The one bright spot (literally) is that the display can get quite bright, which is good for outdoor use or when traveling. The display can reach a 450 nits (cd/m2), and the “auto-brightness” function tends to be a bit on the brighter side, which is the opposite of what I usually experience – I took the XPS 15 to CES and at one point in a presentation Anand was sitting next to me and complained the laptop was “too bright!” I had to disable the auto-brightness setting and manually drop the LCD down to 10% or so before it was acceptable. (Does anyone actually like auto-brightness adjustments on laptops? I’d personally just as soon manually tune the backlight to an acceptable level.) The contrast ratio is also very good, measuring around 1350:1. Part of that comes from the inaccurate colors, but it certainly gives the display some “pop”. Regardless, if you want accurate colors, you absolutely have to plan on calibrating the XPS 15 display. But when you do, things turn out very nice….
Post-calibration, color balance is close to perfect, the gamma is at least approaching a flat line (though still with bumps and valleys at the 5% and 95% marks), and DeltaE is well below 2.0 and often below 1.0, on both the grayscale and the color charts. There are still some errors in shades of blue, but those tend to be less visible to the human eye so it’s not a huge concern. Contrast ratio and maximum brightness take a hit from calibration, as the white levels are now where they should be, but the XPS 15 is still able to reach nearly 1150:1 contrast with a white level of 385 nits.
As far as viewing angles go, Dell is using something they call a PPS panel, which has a wide viewing angle…except it’s not quite the same as IPS. One of the big problems with TN panels is that the colors get all messed up with off-axis viewing, and in particular the vertical viewing angles can be problematic. Let me make it clear that the PPS display is not like TN, but the colors do seem to shift a bit from extreme angles. It’s not something I’d ever experience in normal use, but if I look from an oblique angle it doesn’t quite look like an IPS or VA panel. Or perhaps it’s just that I’ve never used a 15.6” QHD+ IPS panel before? Anyway, the panel is really a great display, but I do wish Dell had factory calibrated to really set it apart.
About that High-DPI Display….
Then there’s the whole DPI scaling aspect as it applies to Windows. Depending on whom you talk to, it’s either not a problem at all (which is true if you stay within the Modern UI), or it can be a huge mess. I tend to fall more into the latter camp, as there are a lot of applications I run that apparently have not been designed with DPI scaling in mind. A big one of these, amazingly, is Chrome – how arguably one of the best browsers still utterly fails to work right with DPI scaling is a mystery to me. But there are many others – FRAPS, older applications, CalMAN 5, and the launch screens for quite a few games all came up during the time I’ve used the XPS 15.
I don’t use a Mac, so I don’t know exactly how the day-to-day experience of a MacBook Pro Retina differs, but from what I’ve gathered Apple was able to jumpstart the support for high-DPI with their first party apps and likely just giving more attention to finer details of the implementation. There are apps that play fine with high-DPI on Windows, and basically all of the Modern apps work well, but I’m having a really difficult time letting go of my actual windows to run things in full screen/split screen modes. I do it all the time on a tablet, and it feels more or less natural, but I regularly have dozens of browser tabs open (in Chrome) and 10-15 other applications running, and switching between them using the existing taskbar just works better for me. Take that as you will, but basically there are still lots of applications out there where the developers haven’t addressed the question of high-DPI support – and for applications that were released more than a couple years ago that haven’t been updated, you can guess that they may never receive such support.
The great thing is that the DPI is so high that there’s a simple workaround if you are having issues with DPI scaling: run at a lower resolution and set the scaling to 100%. It’s actually what I ended up doing after a while, as 1080p 100% on a 15.6” display still feels much more useful to me than 3200x1800 with 200% (or even 150%) scaling. It’s a bit odd for me to finally have a high-DPI laptop and find that, no, I personally don’t really benefit from the higher resolutions. Then again, my eyesight at 40 years old is perhaps not the best starting point for this sort of thing, as even 15.6” 1080p can feel a bit small on text at times. Considering how much I’ve run this display at 1080p, though, I have to say that I’ve never really noticed that I wasn’t running at native resolution.
152 Comments
View All Comments
oleguy682 - Thursday, March 6, 2014 - link
I understand the desire for 16:10 in place of 16:9. But if both are 1800 lines, do you really notice the missing 200 pixels at the bottom? I realize that the AR will resize a displayed window slightly, but it would be interesting to see the actual difference between what is displayed on 16:10 vs. 16:9 on a similar document or webpage that is scaled appropriately for the AR. Unfortunately my 4:3 screen only will give me a 16:10 or 5:3 (16:9.6 or so) AR so I can't really make the comparisons myself.Fox5 - Thursday, March 6, 2014 - link
I had this laptop. I actually had a hell of a time with the intermittent throttling. Believe it or not, it happens fastest and most often with simpler games. Also, I had heavy display corruption with Steam Big Picture mode when using the nvidia gpu.Dell eventually fixed the throttling by replacing the heatsink and fan assembly. It's a tiny piece of hardware too. The corruption in Big Picture mode is still there though.
Silma - Thursday, March 6, 2014 - link
I haven't had any throttling issue since november but then again I'm not using it to play.unni - Thursday, March 6, 2014 - link
If you keep it on a level surface, there doesn't seem to be any throttling. Also, try nVidia inspector and set FPS to 30. That helps as well.Fox5 - Sunday, March 9, 2014 - link
Lol, locking the fps to 30 shouldn't be required. Also, the level surface did nothing for it. I had a legitimately defective model, and replacing the heatsink fixed it.whyso - Thursday, March 6, 2014 - link
Good that they fixed the throttling. I had a 2nd gen model that would idle at 60 degrees and reach over 100 degrees on games like skyrim.Interesting to see that the 750m performs very closely to the 765m in the razer blade.
Also, would it be possible to do some sort of test to see if the PCI-E SSD in the mac lineup actually brings any advantages? Random performance isn't better than anything else out there. Copying files to anything other than a SSD won't be different. The Macbook air reviewed didn't boot up any faster than the 2012 model either. What exactly are the advantages and are they even apparent?
VisionX302 - Thursday, March 6, 2014 - link
I tested the performance of both of these. The Mac was around 1 Gb/s while the Dell was in the 500 Mb/s range. For most real-life activities you wouldn't notice a big difference, but I could a difference in copying files, booting, resuming from sleep, etc.tipoo - Thursday, March 6, 2014 - link
I wonder if it's the same issue, my Studio 15 after some days/hours use would always lock itself at the minimum clock multiplier, had to reset to fix it. I could also fix it through forcing multipliers through Throttlestop, which was also good for me since on Penryn processors they could be undervolted so much that the top clock could use the bottom clocks voltage.tipoo - Thursday, March 13, 2014 - link
And do the larger battery sizes change the size (do they jut out like older models) and how much do they change the weight?superflex - Thursday, March 6, 2014 - link
Jarred,Why make the comparison to the retina MBP in the intro if you dont provide a comparison to the MBP in the charts?
Full retard, baby.