Transcend is a well-known manufacturer of digital storage products, particularly in the industrial space. The company also has plays in the consumer segment, with products ranging from both internal and external SSDs to DRAM modules and card readers.

In April 2023, the company introduced the ESD310C - a portable SSD in a thumb drive form-factor. With claimed read speeds of up to 1050 MBps and write speeds of up to 950 MBps, the USB 3.2 Gen 2 makes its entry into the 10 Gbps-class PSSD market. The main differentiating aspect is the presence of both Type-A and Type-C interfaces. There are four capacity points - 256 GB, 512 GB, 1 TB, and 2 TB.

Kingston's DataTraveler Max had the first mover advantage in the high-performance thumb drive segment. The product line made its debut with a Type-C version, and the Type-A variant was introduced after a few quarters. In the meanwhile, other vendors have tried to differentiate themselves from the Kingston drive by introducing a sturdier version with both Type-A and Type-C interfaces. We took a comprehensive look at one such USB flash drive (UFD) - the OWC Envoy Pro Mini - earlier this year. Transcend's ESD310C attempts to play in the same dual-interface segment, but goes with a traditional thumb drive design and focus on pricing to appeal to a broader consumer base. This review takes a detailed look at the performance and value proposition of the 1 TB version of the new ESD310C, with a particular focus on how it stacks up against the existing players in the segment.

Introduction and Product Impressions

Bus-powered direct-attached storage devices have grown both in storage capacity and speeds over the last decade. The advent of 3D NAND and NVMe, along with faster host interfaces for external devices (such as Thunderbolt and USB 3.2 Gen 2x2), has enabled the introduction of palm-sized flash-based storage devices capable of delivering 2GBps+ speeds.

Prior to the introduction of SATA bridge-based PSSDs, the UFD market was dominated entirely by the thumb drive form factor. Vendors such as Corsair and Mushkin briefly experimented with SATA SSDs behind a USB bridge chip, but the thermal solution and size made the thumb drive UFDs unwieldy. The introduction of high-performance native UFD controllers in recent years from Phison and Silicon Motion has made this category viable again while providing better performance. The Crucial X6, equipped with the Phison U17, was reviewed in August 2021, but it was not a true thumb drive. In that particular category, Silicon Motion has enjoyed significant success, thanks to the popularity of the Kingston DataTraveler Max series (with separate SKUs for Type-C and Type-A drives).

In April 2023, Transcend introduced the ESD310C using essentially the same internals as the Kingston DataTraveler Max Type-A - Silicon Motion's SM2320 native UFD controller coupled with Kioxia's BiCS5 112L 3D TLC NAND. It attempts to differentiate itself from the other high-performance thumb drives based on the following aspects:

  • Dual interface support in a single unit (both Type-A and Type-C)
  • Reduced width to keep adjacent USB ports free for use
  • Highly compact and lightweight
  • Caps at either end to protect connectors from dust and accidental damage

Silicon Motion reached out to us for a review of the Transcend ESD310C as yet another vehicle to showcase the versatility of their UFD controller. The company sent across the 1 TB version of the portable SSD to put through our direct-attached storage test suite.

The industrial design of the ESD310C is typical of a thumb drive - a rectangular design with a metal body bookended by plastic tabs sporting the interface connectors. The protection caps are made of plastic. While the metal body provides some rigidity, the plastic caps and the overall lightweight / compact nature lends it a flimsy appearance.

This review will be comparing the ESD310C with a host of other 1 TB PSSDs in both the thumb drive and palm form-factors. CrystalDiskInfo provides a quick overview of the capabilities of the internal storage device. Since the program handles each bridge chip / controller differently, and the SM2320 has not yet found its way into the tracked controllers, many of the entries are marked as vendor-specific, and some of the capabilities (such as the interface) are deciphered incorrectly. However, other S.M.A.R.T features such as temperature read outs worked well.

S.M.A.R.T Passthrough - CrystalDiskInfo

The table below presents a comparative view of the specifications of the different storage bridges presented in this review.

Comparative Direct-Attached Storage Devices Configuration
Aspect
Downstream Port Native Flash 1x PCIe 3.0 x4 (M.2 NVMe)
Upstream Port USB 3.2 Gen 2 Type-A (Male) + Type-C (Male) USB 3.2 Gen 2 Type-C
Bridge Chip Silicon Motion SM2320 ASMedia ASM2362
Power Bus Powered Bus Powered
     
Use Case 1GBps-class, compact USB thumb drive with both Type-A and Type-C interfaces 1GBps-class, IP67-rated rugged and compact portable SSD
     
Physical Dimensions 71.3 mm x 20 mm x 7.8 mm 76 mm x 52 mm x 12 mm
Weight 11 grams 85 grams
Cable N/A 64.8 cm USB 3.2 Gen 2 Type-C to Type-C
Attached Type-C female to Type-A male adapter (resultant Type-C to Type-A cable length : 67.8 cm)
     
S.M.A.R.T Passthrough Yes Yes
UASP Support Yes Yes
TRIM Passthrough Yes Yes
Hardware Encryption Not Available N/A
     
Evaluated Storage Toshiba BiCS5 112L 3D TLC Kioxia (Toshiba) BiCS 4 96L 3D TLC
     
Price USD 69 USD 229
Review Link Transcend ESD310C 1TB Review OWC Envoy Pro Elektron 1TB Review

Prior to looking at the benchmark numbers, power consumption, and thermal solution effectiveness, a description of the testbed setup and evaluation methodology is provided.

Testbed Setup and Evaluation Methodology

Direct-attached storage devices (including thumb drives) are evaluated using the Quartz Canyon NUC (essentially, the Xeon / ECC version of the Ghost Canyon NUC) configured with 2x 16GB DDR4-2667 ECC SODIMMs and a PCIe 3.0 x4 NVMe SSD - the IM2P33E8 1TB from ADATA.

The most attractive aspect of the Quartz Canyon NUC is the presence of two PCIe slots (electrically, x16 and x4) for add-in cards. In the absence of a discrete GPU - for which there is no need in a DAS testbed - both slots are available. In fact, we also added a spare SanDisk Extreme PRO M.2 NVMe SSD to the CPU direct-attached M.2 22110 slot in the baseboard in order to avoid DMI bottlenecks when evaluating Thunderbolt 3 devices. This still allows for two add-in cards operating at x8 (x16 electrical) and x4 (x4 electrical). Since the Quartz Canyon NUC doesn't have a native USB 3.2 Gen 2x2 port, Silverstone's SST-ECU06 add-in card was installed in the x4 slot. All non-Thunderbolt devices are tested using the Type-C port enabled by the SST-ECU06.

The specifications of the testbed are summarized in the table below:

The 2021 AnandTech DAS Testbed Configuration
System Intel Quartz Canyon NUC9vXQNX
CPU Intel Xeon E-2286M
Memory ADATA Industrial AD4B3200716G22
32 GB (2x 16GB)
DDR4-3200 ECC @ 22-22-22-52
OS Drive ADATA Industrial IM2P33E8 NVMe 1TB
Secondary Drive SanDisk Extreme PRO M.2 NVMe 3D SSD 1TB
Add-on Card SilverStone Tek SST-ECU06 USB 3.2 Gen 2x2 Type-C Host
OS Windows 10 Enterprise x64 (21H1)
Thanks to ADATA, Intel, and SilverStone Tek for the build components

The testbed hardware is only one segment of the evaluation. Over the last few years, the typical direct-attached storage workloads for memory cards have also evolved. High bit-rate 4K videos at 60fps have become quite common, and 8K videos are starting to make an appearance. Game install sizes have also grown steadily even in portable game consoles, thanks to high resolution textures and artwork. Keeping these in mind, our evaluation scheme for portable SSDs and UFDs involves multiple workloads which are described in detail in the corresponding sections.

  • Synthetic workloads using CrystalDiskMark and ATTO
  • Real-world access traces using PCMark 10's storage benchmark
  • Custom robocopy workloads reflective of typical DAS usage
  • Sequential write stress test

In the next section, we have an overview of the performance of the Transcend ESD310C 1 TB drive in these benchmarks. Prior to providing concluding remarks, we have some observations on the UFD's power consumption numbers and thermal solution also.

Performance Benchmarks
Comments Locked

27 Comments

View All Comments

  • gteichrow - Tuesday, June 27, 2023 - link

    Curious if this would make a good TimeMachine drive for a mac. Any thoughts?
  • eastcoast_pete - Thursday, June 29, 2023 - link

    At that capacity (1 TB) and relative speed, it's not bad if the price - $69 shown - stays where it is. Having both USB A and C compatibility is a good differentiator and nice to have. Yes, there a external SSDs that are a lot faster, but they're also a lot bulkier, and usually more expensive. This will do for temporary file backup and transfer in a pinch and is very portable.
  • eastcoast_pete - Thursday, June 29, 2023 - link

    Oh, and damn the autocorrect in Gboard and damn still no edit function on this site. "..there are external.." became "there a..".
  • eastcoast_pete - Thursday, June 29, 2023 - link

    @Ganesh: Forgot to ask: how well do the covers/caps on each end stay on, especially after multiple times of taking them off? In other words, do they stay snuggly on after a few weeks of use when carried around in, let's say, one's pockets in one's jeans?
  • ganeshts - Wednesday, July 5, 2023 - link

    The caps are fairly tightly-clasping. Unlike the usual caps with clasping ridges only on the side, these do have ridges on the long side too. In the course of the review, I must have taken them off and put them back on around 20 - 30 times, and I didn't feel any change in the strength of the clasping.

    At the end of the day, these are made of plastic. and I suspect the ridges might wear off after around 500 - 600 cycles (but, don't quote me on this).
  • eastcoast_pete - Sunday, July 9, 2023 - link

    Thanks for answering, Ganesh!
  • eastcoast_pete - Sunday, July 9, 2023 - link

    And yes, after> 500 cycles (cap off-on), I wouldn't expect anything like these to still be good as new. To me, even details like adding the clasping ridges to the caps also shows that whoever designed it actually thought about daily use. Which is a good thing!

Log in

Don't have an account? Sign up now