Computex 2011: Intel's Thin miniITX Sandy Bridge Platform
by Anand Lal Shimpi on May 31, 2011 4:07 AM EST- Posted in
- Trade Shows
- CPUs
- Intel
- Sandy Bridge
- thin mini ITX
- Computex 2011
Intel's Mooly Eden just showed off its new thin mini ITX Sandy Bridge platform. The form factor is a standard mini ITX but with a low profile backplane so it can fit into thinner systems - particular all-in-ones.
Could this be the start of a DIY all-in-one market? I'm not sure about that, but it will help standardize components there and hopefully lower costs as you can reduce the number of custom components in the system.
10 Comments
View All Comments
duploxxx - Tuesday, May 31, 2011 - link
so now since they have decent competition they will abbandon there slowish atom everywhere?LuckyKnight - Tuesday, May 31, 2011 - link
Without true 24 Hz (23.97 Hz) stilldagamer34 - Tuesday, May 31, 2011 - link
Will be fixed in Ivy Bridge. See Anand's Sandy Bridge review.ChuckDriver - Tuesday, May 31, 2011 - link
For something like this you'd need a standardized internal header for connecting to the monitor. I also can't find the 2" wide 24-pin power supply connector on the motherboard in the pictures, so that probably changes too.A5 - Tuesday, May 31, 2011 - link
Hopefully this means we can get some HTPC cases that don't look terrible. Fitting an HTPC into the form factor of a blu-ray player would be great.scook9 - Tuesday, May 31, 2011 - link
Great it is thinner!Still have to cool the CPU though......
Doltmoopsie - Tuesday, May 31, 2011 - link
You could not be more right about this. Low-profile systems are usually constrained by the cooling. If the CPU faces away from the screen, the CPU could be connected to a back case by a vapor chamber or heat pipes.Also, others here are right that the connector would have to be standardized in size and positions.
AmdInside - Tuesday, May 31, 2011 - link
Is this a problem? For me, the problem has always been getting a CPU cooler that is low enough to fit certain cases. You can get low profile memory.mianmian - Tuesday, May 31, 2011 - link
Looking at Intel's link, the CPU is connected to heat sink via heatpipes. But if the CPU position is flexible, it will be a big computability problem: You have to use a specific board. Hope intel has the solution.ggathagan - Wednesday, June 1, 2011 - link
Although I like the idea, I still remember Intel's last attempt and bringing a new form factor to the market.Anyone else left with a bad taste in their mouth from the BTX standard?